2 layers304.8 × 170.8 mm
2 layers87 × 63 mm
An improved ZVS circuit on PCB with a safety oriented design that generates 400V from low voltage DC for the purposes of operating a Geiger-Müller Tube
- Size
- 87 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 14
- Pads
- 62
- Tracks, vias
- 110, 0
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Oct 2021
- Updated
- 26 Oct 2021
Overview
ZVS is an open-source printed circuit board by aydin-ege, from the aydin-ege/High-Voltage-Generator repository on GitHub, published under the MIT licence. It is a 2-layer board of 87 × 63 mm with 30 parts on 14 nets, routed with 110 tracks and 0 vias.
It is built around the IRLZ44N. Its parts include 9 resistors, 6 diodes, 4 transistors, 2 capacitors and 2 connectors.
Main components
1README
README.mdHigh-Voltage-Generator
An improved ZVS circuit on PCB with a safety oriented design that generates 400V from low voltage DC for the purposes of operating a Geiger-Müller Tube
Check EEE313 Course Project Report.pdf and PHYS212_Final_Report.pdf for more info.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1N53xxB | Diode_THT:D_DO-201_P15.24mm_Horizontal | D5, D6 |
| 2 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D4 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7, R8 |
| 2 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q3, Q4 |
| 2 | 3V9 | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D2, D3 |
| 2 | 50k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3 |
| 2 | 56 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4 |
| 2 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 1 | 0.1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6 |
| 1 | 1000u | Capacitor_THT:C_Radial_D10.0mm_H16.0mm_P5.00mm | C3 |
| 1 | 1u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 47u | Inductor_THT:L_Radial_D10.0mm_P5.00mm_Neosid_SD12k_style3 | L1 |
| 1 | 570 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03 | ZVS:Transformer_HV | J2 |
| 1 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1 |
The 26 most common of 30 parts.
Questions
How big is the ZVS PCB?
It measures 87 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ZVS use?
30 parts, built around the IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ZVS KiCad files?
From the aydin-ege/High-Voltage-Generator repository on GitHub, at the commit this page was made from: the board is ZVS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ZVS design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers94 × 79 mm
- 2 layers
Morpheus kicad
pscrespo/Morpheus-STM32
A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec
66 parts80GPL-3.0 - 2 layers100 × 100 mm
- 2 layers157.5 × 97.8 mm
Esp32PrinterController
MitchBradley/Esp32PrinterController
PCB design for 3D printer controller using ESP32 processor
101 parts16MIT - 2 layers99.1 × 99.1 mm
- 2 layers64.8 × 109.2 mm
Dmx ledstrip dimmer-32ch
robinolejnik/dmx-ledstrip-dimmer-32ch
Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.
105 parts14MIT - 2 layers101.6 × 53.3 mm
BatteryAnalyzer MkII
Moragor/BatteryAnalyzer_MkII
Updated Version of the battery analyzer, now with constant current
25 parts12MIT