2 layers158 × 11 mm
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
22 parts1.1kGPL-3.0
2 layers99.6 × 72.3 mm
- Size
- 99.6 × 72.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 22
- Pads
- 80
- Tracks, vias
- 119, 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Mar 2026
- Updated
- 1 Apr 2026
Overview
EFidget is an open-source printed circuit board by Awesome-XV, from the Awesome-XV/e-figet-pathfinder repository on GitHub. It is a 2-layer board of 99.6 × 72.3 mm with 22 parts on 22 nets, routed with 119 tracks and 1 via.
Its parts include 8 diodes, 7 resistors, 4 switches, 2 connectors and 1 IC. It belongs with the RP2040 boards of this library.
README
README.mde-figet-pathfinder
This is a project that allows you to play around with switches and LED's. It's a reaction game ... for now, I am planning to make a settings/page button that allows you to play different game modes and stuff. But now it's geared toward an F1 style gameplay where the LED's close in on the center light and then they all go blank and it measures the time for you to let go of the "clutch" and hit the "accelerator". Maybe different racing types later?? I made this project as an intro into PCB's, circuits and soldering because it's my first physical project that I have done. I wanted to get into the hardware project and there was a nice guide, but no soldering guide so I get to do that on my own. So this is a bit later, and I added a battery compartment to it, it's now a mobile device and it doesn't have to be plugged in. I also am now planning to add a GT practice shifter to the code where you can practice shifting GT style. I also had to add 2 connectors so that I can solder the battery wires correctly.
Some Pics
BOM Table
| Name | Purpose | Quantity | Total Cost (USD) | Distributor | Link |
|---|---|---|---|---|---|
| XIAO RP2040 | MC, controls everything | 1 | $4.68 | Digikey | Buy |
| LED RED 5MM | Lights up | 7 | $1.05 | Digikey | Buy |
| Through Hole Resistors | For the LEDs | 10 | $0.22 | Digikey | Buy |
| MX SWITCH 12V | Switch to trigger actions | 4 | $5.00 | Digikey | Buy |
| BLACK KEYCAPS | Keycaps for the MX switches | 1 | $5.95 | Digikey | Buy |
| Battery Compartment | To hold the batteries | 1 | $1.77 | Digikey | Buy |
| Connectors | To provide a place for the red and black wires to hook onto | 10 | $0.29 | Digikey | Buy |
| Diode | To prevent reverse current flow | 1 | $0.18 | Digikey | Buy |
| PCB | For connection | 1 | $2.00 | JLCPCB | N/A |
| Shipping | Move these parts | 1 | $10.29 | JLCPCB, Digikey | N/A |
| Tax | I have to pay | 1 | $2.22 | Digikey | N/A |
| Tariffs | Quantity means 5 products I have tax on | 5 | $0.79 | Digikey | N/A |
| Total | $34.44 |
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | L08R5000Q1 | footprints:LEDRD254W57D500H1070 | D1, D2, D3, D4, D5, D6, D7 |
| 7 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
| 4 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
| 2 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1, J2 |
| 1 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D8 |
| 1 | XIAO-RP2040-DIP | footprints:XIAO-RP2040-DIP | U1 |
Similar boards
- 2 layers57 × 65 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
22 parts1kGPL-3.0 - 2 layers81 × 57.2 mm
RP2040-Macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
22 parts915 - 2 layers54.6 × 70.9 mm
BeagleLogic Cape
abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
22 parts479GPL-3.0 - 2 layers66.4 × 24.5 mm
Connecting piece
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
22 parts456 - 2 layers51 × 70 mm
- 2 layers19.7 × 19.7 mm
- 2 layers27.8 × 16 mm
Spi 1v8 level shifter
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
22 parts253GPL-3.0
Questions
How big is the EFidget PCB?
It measures 99.6 × 72.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EFidget use?
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EFidget KiCad files?
From the Awesome-XV/e-figet-pathfinder repository on GitHub, at the commit this page was made from: the board is eFidget.kicad_pcb and its schematic eFidget.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EFidget design in my own project?
Its repository states no licence, so its author keeps all rights: ask Awesome-XV before reusing the design.