
Camera cable
awdriggs/non_optimal_imaging
This project explores how “non-optimal” digital cameras can be used to critically analyze photography. Each camera is missing one or more of the key affordances of a modern camera.

This project explores how “non-optimal” digital cameras can be used to critically analyze photography. Each camera is missing one or more of the key affordances of a modern camera.
Camera base is an open-source printed circuit board by awdriggs, from the awdriggs/non_optimal_imaging repository on GitHub. It is a 2-layer board of 100 × 80 mm with 19 parts on 49 nets, routed with 189 tracks and 0 vias.
Its parts include 5 switches, 2 resistors, 2 diodes, 2 connectors and 1 IC.
This project explores how “non-optimal” digital cameras can be used to critically analyze photography. Each camera is missing one or more of the key affordances of a modern camera. By reintroducing limitations we can begin to understand our collective and individual relationships with photography at a moment when photography itself is being rapidly reshaped by machine learning.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 4 | SW_Push_Dual | camera_base:PUSH_BUTTON_12mm | SW1, SW2, SW3, SW5 |
| 2 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R1, R2 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | GPIO_19 | LED_THT:LED_D3.0mm | D1 |
| 1 | LED | LED_THT:LED_D3.0mm | D2 |
| 1 | R_Potentiometer_US | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
| 1 | Raspberry_Pi_4 | RASPBERRY_PI_ZERO_2_W:MODULE_RASPBERRY_PI_ZERO_2_W | J1 |
| 1 | ~ | camera_base:switch | U1 |
| 1 | ~ | camera_base:TFT 1.14 | SCREEN |
| 1 | ~ | camera_base:SEED Studio LIPO Rider Plus | LIPO RIDER |
| 1 | ~ | camera_base:5D_Button | S4 |

awdriggs/non_optimal_imaging
This project explores how “non-optimal” digital cameras can be used to critically analyze photography. Each camera is missing one or more of the key affordances of a modern camera.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support


nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the awdriggs/non_optimal_imaging repository on GitHub, at the commit this page was made from: the board is circuit/camera_base/camera_base.kicad_pcb and its schematic circuit/camera_base/camera_base.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask awdriggs before reusing the design.