
LB-100
avlyubimov/svc-platform
Status: EVT-LAYOUT-AUTHORIZED; connectivity routing complete; fab review open

Status: EVT-LAYOUT-AUTHORIZED; connectivity routing complete; fab review open
PB-100 is an open-source printed circuit board by avlyubimov, from the avlyubimov/svc-platform repository on GitHub. It is an 8-layer board of 150 × 90 mm with 424 parts on 295 nets, routed with 5,753 tracks and 948 vias.
It is built around the TPS48110AQDGXRQ1, IAUT300N08S5N012ATMA2 and ESD2CANFD24DBZRQ1. Its parts include 157 resistors, 89 capacitors, 11 transistors and 10 ICs.
Status: EVT-LAYOUT-AUTHORIZED; connectivity routing complete; fab review open
This directory contains the reviewed value-bearing FB-100 KiCad schematic and project-local symbol/footprint libraries.
The controlled FB-100.kicad_pcb placement and routing are generated from the frozen
44-component schematic and project-local footprints. Mechanical-envelope and
USB/no-back-power inputs are applied. The route manifest contains 453 segments,
48 vias and four filled GND zones with zero refilled DRC or unconnected findings.
The USB-shield capacitor C2 uses the exact automotive KEMET
C1206C102JDGACAUTO 1 nF, 1 kV, C0G part and a controlled 1206 footprint.
USB stack geometry, analytical impedance/skew and transition return-via checks
are automated. Supplier field-solver confirmation, physical JFB1 cable/latch
fit, enclosure integration and final assembly DFM remain open. There are no
manufacturing outputs: Gerbers, drills, pick-place files, BOM/CPL order
packages, zipped fabrication packages, and board orders remain blocked until
the later prototype/production gates close.
Release boundary: no manufacturing outputs are authorized.
../FB-100-requirements.md../FB-100-schematic-freeze-checklist.md../FB-100-pcb-layout-start-checklist.csv../FB-100-footprint-binding-inventory.csv../FB-100-footprint-binding-closeout.csv../FB-100-footprint-binding-closeout.md../FB-100-mechanical-envelope-inventory.csv../FB-100-mechanical-layout-inputs.csv../FB-100-usb-no-back-power-layout-rules.csv../FB-100-board-release-blocker-register.csv../../../../production/board-order/three_board_footprint_binding_status.csv../../../../production/board-order/three_board_mechanical_envelope_status.csv../../../logic-board/LB-100/LB-100-requirements.md../../../../docs/adr/ADR-0014-lb-fb-baseline-requirements.md| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | IAUT300N08S5N012ATMA2 | PB100:PG-HSOF-8-1_TOLL_Infineon | Q1, Q101, Q102, Q103, Q104, Q105, Q106, Q107, Q108, Q109, Q110 |
| 10 | 0R REPLACEABLE PD | PB100:R0603 | R1111, R1211, R1311, R1411, R1511, R1611, R1711, R1811, R1911, R2011 |
| 10 | 100R 1% RSET | PB100:R0603 | R1104, R1204, R1304, R1404, R1504, R1604, R1704, R1804, R1904, R2004 |
| 10 | 100R DNP DRAIN-SOURCE SNUBBER | PB100:R0603 | R1113, R1213, R1313, R1413, R1513, R1613, R1713, R1813, R1913, R2013 |
| 10 | 100k CTL DEFAULT-OFF | PB100:R0603 | R1109, R1209, R1309, R1409, R1509, R1609, R1709, R1809, R1909, R2009 |
| 10 | 100nF 100V X7R VS | PB100:C0805 | C1104, C1204, C1304, C1404, C1504, C1604, C1704, C1804, C1904, C2004 |
| 10 | 103k 1% | PB100:R0603 | R1102, R1202, R1302, R1402, R1502, R1602, R1702, R1802, R1902, R2002 |
| 10 | 10k FLT PULL-UP | PB100:R0603 | R1112, R1212, R1312, R1412, R1512, R1612, R1712, R1812, R1912, R2012 |
| 10 | 10nF 50V X7R IMON | PB100:C0603 | C1105, C1205, C1305, C1405, C1505, C1605, C1705, C1805, C1905, C2005 |
| 10 | 12.1k 1% RIMON | PB100:R0603 | R1107, R1207, R1307, R1407, R1507, R1607, R1707, R1807, R1907, R2007 |
| 10 | 12.4k 1% | PB100:R0603 | R1103, R1203, R1303, R1403, R1503, R1603, R1703, R1803, R1903, R2003 |
| 10 | 1k 1% IMON ADC SERIES | PB100:R0603 | R1108, R1208, R1308, R1408, R1508, R1608, R1708, R1808, R1908, R2008 |
| 10 | 1nF 100V C0G DNP SNUBBER | PB100:C0603 | C1107, C1207, C1307, C1407, C1507, C1607, C1707, C1807, C1907, C2007 |
| 10 | 1nF 25V DNP GATE-SLEW | PB100:C0603 | C1106, C1206, C1306, C1406, C1506, C1606, C1706, C1806, C1906, C2006 |
| 10 | 1nF 50V C0G ISCP | PB100:C0603 | C1103, C1203, C1303, C1403, C1503, C1603, C1703, C1803, C1903, C2003 |
| 10 | 3.3R 1% REPLACEABLE PU | PB100:R0603 | R1110, R1210, R1310, R1410, R1510, R1610, R1710, R1810, R1910, R2010 |
| 10 | 470k 1% | PB100:R0603 | R1101, R1201, R1301, R1401, R1501, R1601, R1701, R1801, R1901, R2001 |
| 10 | 470nF 25V X7R BST | PB100:C0603 | C1102, C1202, C1302, C1402, C1502, C1602, C1702, C1802, C1902, C2002 |
| 10 | 680nF 16V X7R TMR | PB100:C0603 | C1101, C1201, C1301, C1401, C1501, C1601, C1701, C1801, C1901, C2001 |
| 10 | MMBT3904-Q REMOTE TEMP DIODE | PB100:SOT-23-3_DBZ_TI | QT101, QT102, QT103, QT104, QT105, QT106, QT107, QT108, QT109, QT110 |
| 10 | STPS40170CGY-TR 2x20A 170V COMMON-CATHODE | PB100:D2PAK_3_CommonCathode | DCL101, DCL102, DCL103, DCL104, DCL105, DCL106, DCL107, DCL108, DCL109, DCL110 |
| 10 | TPS48110AQDGXRQ1 | PB100:VSSOP-20_19P-L5.0-W3.0-P0.50-LS5.0-BL_PE16 | U101, U102, U103, U104, U105, U106, U107, U108, U109, U110 |
| 9 | 49.9k 1% RIWRN | PB100:R0603 | R1105, R1305, R1405, R1505, R1605, R1705, R1805, R1905, R2005 |
| 5 | 3.83k 1% RISCP | PB100:R0603 | R1306, R1406, R1606, R1706, R2006 |
| 5 | WSL40261L500FEA 1.5mR 3W FOUR-TERMINAL | PB100:WSL4026_Vishay_4Terminal | RSH103, RSH104, RSH106, RSH107, RSH110 |
| 4 | 10nF 50V X7R | PB100:C0603 | C24, C61, C64, C67 |
| 4 | LOCAL M3 NPTH | PB100:MountingHole_3.2mm | H1, H2, H3, H4 |
| 4 | STACK M2.5 NPTH | PB100:MountingHole_2.7mm | H5, H6, H7, H8 |
| 3 | 100nF 50V X7R | PB100:C0402 | C_CAN1_VCC1, C_CAN1_VIO1, CCAP1 |
| 3 | 1k 1% ADC SERIES | PB100:R0603 | R62, R65, R68 |
| 3 | 3.74k 1% RISCP | PB100:R0603 | R1506, R1806, R1906 |
| 3 | 4.7k 1% AEC-Q200 | PB100:R0603 | R61, R64, R67 |
| 3 | 47k 1% | PB100:R0402 | R_CAN1_OE1, R_CAN1_SILENT1, R_CAN1_TX_BIAS1 |
| 3 | CSS4J-4026 3.0mR FOUR-TERMINAL | PB100:CSS4J-4026_Bourns | RSH105, RSH108, RSH109 |
| 3 | NTCGS103JF103FT8 10k 1% B3435 AEC-Q200 | PB100:R0402 | RT1, RT2, RT3 |
| 2 | 100nF 16V X7R | PB100:C0603 | C22, C36 |
| 2 | 10R 0.1% SHUNT FILTER | PB100:R0603 | R20, R21 |
| 2 | 10k 0.1% | PB100:Board_ID_Resistor_0603 | RID1, RID2 |
| 2 | 1nF 100V C0G DNP | PB100:C0603 | C40, CSN1 |
| 2 | 22uF 10V X7R | PB100:C1210 | C34, C35 |
| 2 | 42.2k 1% | PB100:R0603 | R3, R4 |
| 2 | ESD2CANFD24DBZRQ1 | PB100:SOT-23-3_DBZ_TI | D_CAN1, D_FOG1 |
| 1 | 0R FOG 12V common DNP | PB100:R0603_DNP_LINK_1608Metric | R_FOG_12V1 |
| 1 | 0R FOG dry-contact common DEFAULT | PB100:R0603_DNP_LINK_1608Metric | R_FOG_GND1 |
| 1 | 0R INPUT FAULT AGGREGATE | PB100:R0603 | R26 |
| 1 | 0R REPLACEABLE Q1 GATE | PB100:R0603 | R7 |
| 1 | 0R REPLACEABLE Q2 GATE | PB100:R0603 | R8 |
| 1 | 1.00k 1% | PB100:R0603 | R5 |
| 1 | 100R BUCK SNUBBER DNP | PB100:R0603 | R37 |
| 1 | 100R DNP Q1 DAMPING | PB100:R0603 | RSN1 |
| 1 | 100R DNP Q2 DAMPING | PB100:R0603 | RSN2 |
| 1 | 100k 1% | PB100:R0402 | R_CAN1_STATUS_PULL1 |
| 1 | 100k 1% | PB100:R0603 | R31 |
| 1 | 100nF 100V X7R | PB100:C0805 | C31 |
| 1 | 100nF 50V X7R DIFF | PB100:C0603 | C20 |
| 1 | 10k 0.1% | PB100:R0603 | R28 |
| 1 | 10k 1% | PB100:R0603 | R6 |
| 1 | 10k PB I2C SCL PULL DNP | PB100:R0603 | R24 |
| 1 | 10k PB I2C SDA PULL DNP | PB100:R0603 | R23 |
| 1 | 10nF PGOOD FILTER DNP | PB100:C0603 | C37 |
| 1 | 110k 1% TYPE3 RA | PB100:R0603 | R36 |
| 1 | 120R 1% DNP | PB100:R0603_DNP_LINK_1608Metric | R_CAN1_TERM1 |
| 1 | 158k 0.1% | PB100:R0603 | R33 |
| 1 | 180pF 50V C0G TYPE3 CB | PB100:C0603 | C39 |
| 1 | 1k 0.1% | PB100:R0603 | R29 |
| 1 | 1k 1% | PB100:R0402 | R_CAN1_STATUS_SER1 |
| 1 | 1k 1% VBUS FILTER | PB100:R0603 | R22 |
| 1 | 1nF 100V C0G | PB100:C0603 | C21 |
| 1 | 1nF 200V C0G DNP | PB100:C0603 | CSN2 |
| 1 | 1nF PB I2C INT FILTER DNP | PB100:C0603 | C23 |
| 1 | 2.2nF 50V X7R | PB100:C0603 | C33 |
| 1 | 2.2uF 100V X7R | PB100:C1210 | C30 |
| 1 | 2.61k 1% RISCP | PB100:R0603 | R1206 |
| 1 | 200k 0.1% 100V | PB100:R0603 | R27 |
| 1 | 3.3nF 100V C0G TYPE3 CA | PB100:C0603 | C38 |
| 1 | 3.40k 1% RISCP | PB100:R0603 | R1106 |
| 1 | 332k 1% | PB100:R0603 | R30 |
| 1 | 40A PCB PIGTAIL TO NEAR-BATTERY 50A FUSE | PB100:POWER_PIGTAIL_2xTH_40A | JIN1 |
| 1 | 41.2k 1% | PB100:R0603 | R32 |
| 1 | 47k PB I2C INT PULL DNP | PB100:R0603 | R25 |
The 325 most common of 424 parts.

avlyubimov/svc-platform
Status: EVT-LAYOUT-AUTHORIZED; connectivity routing complete; fab review open

avlyubimov/svc-platform
Status: EVT-LAYOUT-AUTHORIZED; connectivity routing complete; fab review open

avlyubimov/svc-platform
Status: EVT-LAYOUT-AUTHORIZED; connectivity routing complete; fab review open


Ekta-Gupta27/custom-flight-controller-pcb
Custom flight controller PCB designed in KiCad with STM32F7, multiple sensors, CAN, USB, telemetry, PWM and IO interfaces.

FinnKrieger/dashbox-pcb
A two-layer dashboard controller board for the USC Formula Electric car. It sits on the vehicle CAN bus, drives the driver-facing dash, and takes its power from the car's 12 V rail.

mauro-starspec/Elevation_Pivot_Daughter-Board
KiCad 9 daughter board for the Starspec elevation/pivot controller.


Fairank/FieldDock
Compact iPhone companion hardware: editable PCB, mechanical CAD and portable firmware. Engineering prototype; original work available for noncommercial use.

OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

CopperPilot/tablet
An 8.4-inch tablet around a chip-down RK3566 + LPDDR4X: 8-layer 0.8 mm mainboard, USB-C daughter board, 1600x2560 dual-DSI display, CNC aluminium shell. Designed end to end by CopperPilot, open for review.
It measures 150 × 90 mm and has 8 copper layers, 1.6 mm thick.
424 parts, built around the TPS48110AQDGXRQ1, IAUT300N08S5N012ATMA2 and ESD2CANFD24DBZRQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the avlyubimov/svc-platform repository on GitHub, at the commit this page was made from: the board is hardware/power-board/PB-100/kicad/PB-100.kicad_pcb and its schematic hardware/front-board/FB-100/kicad/FB-100.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask avlyubimov before reusing the design.