
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Titan Blinker is LED blinker built using XIAO RP2040 microcontroller and mechanical switches. The Titan blinker contains electronics,pcb designing and firmware designing.
Titan c is an open-source printed circuit board by avadsariya0-coder, from the avadsariya0-coder/TITAN-BLINKER repository on GitHub, published under the MIT licence. It is a 2-layer board of 51.5 × 63.6 mm with 10 parts on 24 nets, routed with 58 tracks and 4 vias.
Its parts include 3 resistors, 3 diodes, 3 switches and 1 IC. It belongs with the RP2040 boards of this library.
Custom LED blinker with mechanical switches built using the XIAO RP2040.
Titan Blinker is LED blinker built using XIAO RP2040 microcontroller and mechanical switches. The Titan blinker contains electronics,pcb designing and firmware designing.
Unlike the other LED blinker Titan blinker contains XIAO RP2040 and switches. Most of the blinker uses battery instead of microcontroller but titan blinker uses XIAO RP2040 and switches programmed using Arduino. The switches helps in turning on the different LED's independently. The use of switch trigger different lighting behaviour
These project is built using XIAO RP2040,cherry MX button switch, DSA key caps,3 resistors and LEDs.
The idea of creating Titan Blinker came from idea of creating a compact and switch controlled LED blinker.I wanted to make the project different thats why I used cherry MX switch which provides tactical feedback and feels awesome and I don't want LEDs to blink continuously like normal blinkers. The use of the MX cherry allows turning on and off of LEDs using switches which seems to be different.
My project is inspired by the project found on the stasis hackclub made by the Meghana Madiraju.
• Powered by XIAO RP2040 Microconmtroller
• Mechanical cherry MX switch
• Multiple LED blinking modes
• Powered by USB-C
• Through hole components
• DSA key caps
• interactive LED blinking system
• Portable and lightweight
• Customised PCB
Bill of material titan blinker.csv
The PCB for Titan blinker was designed using Kicad.The board contains XIAO RP2040 microcontroller,Mechanical switches,Through hole LEDs and resistors.
Features:
• Through hole component
• LED indicators
• USB-C powered microcontroller
• Mechanical switches
The enclosure is built using fusion 360. The enclosure contains transparent design.
The design is based on two part construction consisting of removable top and bottom.
Features:
• USB-C port opening
• LED visibility
• Screw based enclosure
• Switch cutouts
The firmware for the Titan blinker was designed using Arduino IDE.
Features:
• Press button 1 to toggle LED 1
• Press button 2 after button 1 within 2 second LED 2 on
• Press button 3 for 2 seconds to on the LED 3
• Double press button 3 to turn off LED 3
Connect the XIAO RP2040 with the usb c connector and upload the firmware using Arduino. Steps to be followed:
i.Install Aruino IDE.
Install RP2040 board package.
Connect XIAO RP2040 using USB-C
Open the firmware.ino file.
Select the correct Communication port(COM)
Upload the firmware
Testing the firmware:
i. Press button1 to toggle led1 .
ii. Press button2 after pressing button 1 within 2 sec.
iii. Press button3 for 2 second and Led3 will turn on.
iv. Press button 3 twice to turn of Led3.
if these works properly u are done with your firmware.
Close the enclosure using lid and the screw.
Contributions,suggestions, and feedback are welcome
If you'd like to improve Titan blinker
https://github.com/avadsariya0-coder/TITAN-BLINKER
Create your Feature branch
Commit your changes
Open a pull request.
17•India•Fallout
This project is licensed under MIT License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | L08R5000Q1 | footprints:LEDRD254W57D500H1070 | D1, D2, D3 |
| 3 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3 |
| 3 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3 |
| 1 | XIAO-RP2040-DIP | footprints:XIAO-RP2040-DIP | U1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 51.5 × 63.6 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the avadsariya0-coder/TITAN-BLINKER repository on GitHub, at the commit this page was made from: the board is PCB/titan c.kicad_pcb and its schematic PCB/titan c.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).