
Security I2CRJ45 210
austinscreations/oxrs-security-module
module 8 port pcb that allows for EOL monitoring of security sensors

an oxrs compatible I2CRJ45 board in a modular format
I2CRJ45 220 is an open-source printed circuit board by austinscreations, from the austinscreations/Modular-I2CRJ45 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 69.5 × 100 mm with 88 parts on 125 nets, routed with 1,115 tracks and 125 vias.
It is built around the AO3401A, SM4007 and R-RJ45R08P-8000. Its parts include 28 resistors, 8 transistors, 6 connectors, 5 capacitors and 4 diodes.
an oxrs compatible I2CRJ45 board in a modular format
2023-10-25 version 220 was created to fix p fet issue also updated JLCPCB PCBa files for the modular I2CRJ45 and port PWR extention
this baord is 2 layers
port PWR is 2 layers
port PWR extention is a remote switch that allows you to turn ports on and off. the use of a 1.25mm jst cable could eb used instead, simply with pin 5 being GND connect the others to this and a port will be ON
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R3, R10, R12, R13, R14, R15, R16, R17, R18, R19, R20, R22, R24, R26, R28 +3 |
| 10 | 10k | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN2, RN5, RN6, RN9, RN10, RN13, RN14, RN17, RN18 |
| 8 | 18k | Resistor_SMD:R_0603_1608Metric | R5, R7, R9, R11, R21, R23, R25, R27 |
| 8 | 1k | Resistor_SMD:R_Array_Convex_4x0603 | RN3, RN4, RN7, RN8, RN11, RN12, RN15, RN16 |
| 8 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | Fuse_PTC | Resistor_SMD:R_0603_1608Metric | TH1, TH2, TH3, TH4, TH5, TH6, TH7, TH8 |
| 4 | 100nf | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4 |
| 4 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4 |
| 2 | Conn_01x05_MountingPin | Connector_JST:JST_GH_SM05B-GHS-TB_1x05-1MP_P1.25mm_Horizontal | J5, J6 |
| 2 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J1, J2 |
| 2 | MCP23017_SO | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | U1, U2 |
| 2 | SM4007 | Diode_SMD:D_SOD-123F | D1, D2 |
| 2 | SW_DIP_x04 | Austins creations:4P_DIP | SW1, SW2 |
| 2 | Screw_Terminal_01x02 | Austins creations:2pinblock | J3, J4 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 2P_DIP | Austins creations:2P_DIP | SW3 |
| 1 | 330uf 50v | Capacitor_SMD:CP_Elec_10x10 | C5 |
| 1 | Creations_logo_med | logos:Creations logo med | LOGO1 |
| 1 | R-RJ45R08P-8000 | Austins creations:R-RJ45R08P-8000 | RJ45-1 |
| 1 | blue | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | red/yellow | LED_SMD:LED_0603_1608Metric | D3 |

austinscreations/oxrs-security-module
module 8 port pcb that allows for EOL monitoring of security sensors

DLehenbauer/commodore-pet-clone
Open hardware clone of the Commodore PET 4032

gamingdoom/gonioreflectometer-neural-brdfs
DIY Gonioreflectometer and neural BRDFs.



TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

maxxir/m1284p_wiz5500
Lots of projects using ATMEGA 1284p and Ethernet NIC Wiznet 5500 (based on W5500 EVB examples)

pedalboard/pedalboard-hw
pedalboard audio midi processor open hardware
It measures 69.5 × 100 mm and has 2 copper layers, 1.6 mm thick.
88 parts, built around the AO3401A, SM4007 and R-RJ45R08P-8000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the austinscreations/Modular-I2CRJ45 repository on GitHub, at the commit this page was made from: the board is rev 2_2/I2CRJ45 220.kicad_pcb and its schematic port PWR extention/port PWR extention.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).