4 layers100 × 120 mm
Panoptes
jjCSE113NMT/dsp-neutron-spectrometer
A place to keep all our material related to our senior design project.
111 parts3
2 layers192 × 264.1 mm
Spotify led matrix
austindriggs/spotify-led-matrixSpotify Album Cover LED Matrix Display
- Size
- 192 × 264.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 112
- Pads
- 346
- Tracks, vias
- 162, 9
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Sep 2023
- Updated
- 8 May 2026
Overview
Spotify led matrix is an open-source printed circuit board by austindriggs, from the austindriggs/spotify-led-matrix repository on GitHub. It is a 2-layer board of 192 × 264.1 mm with 90 parts on 112 nets, routed with 162 tracks and 9 vias.
It is built around the ESP32-WROOM-32E, FT231XS-R and MC74HC1G14DTT1G-TP, with the RMCF1206FT10K0, RMCF1206FT1K00 and IRLML6244TRPBF among its other parts. Its parts include 35 resistors, 16 capacitors, 9 transistors, 8 diodes and 6 ICs. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
12
ESP32-WROOM-32E
SMD,18x25.5mmSMD,18x25.5mm WiFi Modules ROHSEspressif SystemsWiFi Modules
FT231XS-R
SSOP-20-150mil-40℃~+85℃ 125uA 5V 8.4mA USB 2.0 USB to UART SSOP-20-150mil USB Converters ROHSFTDIUSB Converters
MC74HC1G14DTT1G-TP
SOT-23-5-40℃~+85℃ 1 100mV、100mV、100mV、260mV、260mV 10uA 2.6mA 2.6mA 2V~6V 4.18V 74HC 9ns@6V,50pF Noise suppression function Schmitt trigger SOT-23-5 Inverters ROHSTECH PUBLICInverters
RMCF1206FT10K0
1206-55℃~+155℃ 10kΩ 200V 250mW Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountRMCF1206FT1K00
1206-55℃~+155℃ 1kΩ 200V 250mW Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface Mount
IRLML6244TRPBF
SOT-231 N-channel 1.1V 1.3W 140pF 20V 27mΩ@2.5V 6.3A 700pF 8.9nC@4.5V 98pF SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETsRMCF1206FT22R0
1206-55℃~+155℃ 200V 22Ω 250mW Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountRMCF1206FT82R0
1206-55℃~+155℃ 250mW 82Ω Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountRMCF1206FT120R
1206-55℃~+155℃ 120Ω 200V 250mW Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountRMCF1206FT27R0
1206-55℃~+155℃ 200V 250mW 27Ω Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountSS8050-G
SOT-231 NPN 1.5A 100 100MHz 100nA 25V 300mW 400mV 5V NPN SOT-23 Bipolar (BJT) ROHSComchipBipolar (BJT)RMCF1206FT1R00
1206-55℃~+155℃ 1Ω 200V 250mW Thick Film Resistor ±1% ±200ppm/℃ 1206 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface Mount
README
hardware/readme.mdHardware
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5, R19, R20, R25, R27, R29, R30, R31, R34, R35, R36 |
| 7 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R11, R13, R15, R17, R26, R28 |
| 7 | IRLML6244TRPBF | Package_TO_SOT_SMD:SOT-23 | Q1, Q4, Q5, Q6, Q7, Q8, Q9 |
| 6 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C6, C7, C10, C12, locked |
| 6 | 22 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R10, R12, R14, R22, R23 |
| 3 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9, C11, C21 |
| 3 | 82 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R6, R7 |
| 3 | D | Diode_SMD:D_SOD-523 | D5, D6, D7 |
| 3 | MC74HC1G14DTT1G | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3, U4, U5 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | 120 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R9 |
| 2 | 27 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R32, R33 |
| 2 | 47pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C17, C19 |
| 2 | SS8050-G | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | ~ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R18, R21 |
| 1 | +3V3 | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | +5V | spotify-led-matrix:54-00166 | J1 |
| 1 | +5V | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | 0 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | BOOT | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | BOOT | spotify-led-matrix:SW_TL3301DF160QG | SW3 |
| 1 | BRIGHTNESS | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z9.0mm | D4 |
| 1 | DEV | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z9.0mm | D2 |
| 1 | DISPLAY_IN | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | J2 |
| 1 | DISPLAY_OUT | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | J4 |
| 1 | EN | TestPoint:TestPoint_Pad_D2.0mm | TP5 |
| 1 | EN | spotify-led-matrix:SW_TL3301DF160QG | SW2 |
| 1 | ESP32-WROOM-32E | spotify-led-matrix:ESP32-WROOM-32E | U1 |
| 1 | FT231XS-R | Package_SO:SSOP-20_3.9x8.7mm_P0.635mm | U6 |
| 1 | GND | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | MODES | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z9.0mm | D8 |
| 1 | MODE_SELECT | spotify-led-matrix:CUI_ACZ11BR1E-20FD1-20C | SW1 |
| 1 | NCP1117-ADJ | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | USB | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | USB_C_Receptacle_USB2.0 | spotify-led-matrix:MOLEX_2169900003 | J5 |
| 1 | VOLUME | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z9.0mm | D3 |
The 86 most common of 90 parts.
Questions
How big is the Spotify led matrix PCB?
It measures 192 × 264.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Spotify led matrix use?
90 parts, built around the ESP32-WROOM-32E, FT231XS-R, MC74HC1G14DTT1G-TP and RMCF1206FT10K0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Spotify led matrix KiCad files?
From the austindriggs/spotify-led-matrix repository on GitHub, at the commit this page was made from: the board is hardware/spotify-led-matrix.kicad_pcb and its schematic hardware/spotify-led-matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Spotify led matrix design in my own project?
Its repository states no licence, so its author keeps all rights: ask austindriggs before reusing the design.
Similar boards
- 2 layers126.1 × 134.7 mm
Battery test board
oresat/oresat-battery-testing
Battery testing software and circuitry for testing cells and batteries to fly on the ISS
80 parts1GPL-3.0 - 2 layers40 × 25 mm
Cm300-board
acobaugh/cm300dy-24h-gate-drive-board
Schematic and PCB for connecting protection diodes and gate resistors to a Mitsubishi CM300DY-24H IGBT. May fit others.
13 parts - 4 layers61 × 100 mm
BigCore
Dschadu/Geistwerk-BigCore
An ESP32-based open hardware control board designed for Bottango-powered animatronic and motion projects.
152 parts4CERN-OHL-W-2.0 - 4 layers65 × 100 mm
PGR
Projeto-Guarda-Rios/PCB
O repositório para a PCB do Projeto Guarda Rios! Inclui todos os ficheiros relacionados com a PCB!
188 parts2MIT - 2 layers
Esp32-starter board
Jzuni97/esp32-starter-board
A basic project for creating a starter board with an esp32 SoC.
13 parts - 4 layers82 × 94 mm
ESP32 ETH Panel
mede-erik/ESP32_ETH_BORD
A development board based on ESP32-WROOM-32E and LAN8720A controller, designed to ensure stable and high-performance Ethernet connectivity in IoT applications and integrations with Home Assistant. (WIP)
120 partsMIT - 4 layers40 × 80 mm
BarbelMotionTracker V1
ThorbenH/ba-thesis-project
This git project is dedicated to a prototype implementation that attempts to track and evaluate the motion of a barbell in the gym.
123 parts