2 layers217.1 × 393.8 mm
Sweepv2
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
53 parts2.1k
2 layers86.4 × 69.9 mm
Flaps throttle pcb
AugustoS97/flaps-throttle-gearsPCB with ATMega for Flaps, Throttle and Gears for flight simulator
- Size
- 86.4 × 69.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 90
- Pads
- 197
- Tracks, vias
- 290, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Oct 2021
- Updated
- 12 Oct 2021
Overview
Flaps throttle pcb is an open-source printed circuit board by AugustoS97, from the AugustoS97/flaps-throttle-gears repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 86.4 × 69.9 mm with 53 parts on 90 nets, routed with 290 tracks and 2 vias.
Its parts include 26 connectors, 17 capacitors and 5 resistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdflaps-throttle-gears-pcb
PCB with ATMega for Flaps, Throttle and Gears for flight simulator
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8, C10, C11, C12, C13, C14, C15, C16, C17 +1 |
| 15 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1, J2, J3, J4, J5, J6, J7, J16, J20, J21, J22, J23, J24, J25, J26 |
| 11 | PINHEADER | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J8, J9, J10, J11, J12, J13, J14, J15, J17, J18, J19 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | h1, h2, h3, h4 |
| 3 | 220R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R4, R5 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 1 | Master_Arduino_Mega_Embebido_Arduino_Mega_v3 | Mega2560-pro-mini-radio:MEGA_Embebido | MCU1 |
Similar boards
- 2 layers121.9 × 81.3 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
53 parts1kGPL-3.0 - 2 layers48 × 48 mm
- 2 layers103.7 × 74.1 mm
PicoGUS
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
53 parts805 - 2 layers60.5 × 76.8 mm
Headphones prototype pcb
strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7
53 parts493MIT - 2 layers59.1 × 26.1 mm
- 2 layers49 × 49 mm
Open source BMS
Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
53 parts248 - 2 layers39 × 40 mm
Mdb bridge esp32s3
nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT
53 parts190MIT
Questions
How big is the Flaps throttle pcb PCB?
It measures 86.4 × 69.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flaps throttle pcb use?
53 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flaps throttle pcb KiCad files?
From the AugustoS97/flaps-throttle-gears repository on GitHub, at the commit this page was made from: the board is flaps-thottle-gear-pcb/flaps-throttle-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flaps throttle pcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).