4 layers60 × 94 mm
DaisySeedPedal125b
bkshepherd/DaisySeedProjects
A collection of hardware and software projects based around the Electro-Smith Daisy Seed
80 parts559MIT
2 layers50.8 × 23.5 mm
Midi In Out Dev
audiobird/Midi_In_Out_Dev3Midi dev board that supports 3.3 and 5 volts
- Size
- 50.8 × 23.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 15
- Pads
- 42
- Tracks, vias
- 62, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Feb 2022
- Updated
- 1 Feb 2022
Overview
Midi In Out Dev is an open-source printed circuit board by audiobird, from the audiobird/Midi_In_Out_Dev repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.8 × 23.5 mm with 12 parts on 15 nets, routed with 62 tracks and 1 via.
It is built around the H11L1. It belongs with the audio and music and microcontroller boards boards of this library.
Main components
1README
README.mdMidi In / Out Dev board
Midi dev board that supports 3.3 and 5 volts
Selectable via jumper
jumpers go from bottom to top of the 2x4 header.
midi polarity == Type A
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 220Ω, 220Ω, 220Ω |
| 1 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 10Ω |
| 1 | 1n4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | 1N4148 |
| 1 | 270 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 270Ω |
| 1 | 33 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 33Ω |
| 1 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | G TX RX + |
| 1 | H11L1 | Package_DIP:DIP-6_W7.62mm | H11L1 |
| 1 | IN | Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J2 |
| 1 | OUT | Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J1 |
The 11 most common of 12 parts.
Questions
How big is the Midi In Out Dev PCB?
It measures 50.8 × 23.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Midi In Out Dev use?
12 parts, built around the H11L1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Midi In Out Dev KiCad files?
From the audiobird/Midi_In_Out_Dev repository on GitHub, at the commit this page was made from: the board is hw/KiCad/midi_in_out_dev.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Midi In Out Dev design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers245.2 × 100 mm
V5 main
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
160 parts156 - 2 layers64.3 × 56 mm
Mt32-pi midi hat
chris-jh/mt32-pi-midi-hat
A Raspberry Pi Midi Hat for the project mt32-pi by Dale Whinham (https://github.com/dwhinham/mt32-pi)
22 parts139GPL-3.0 - 2 layers100 × 100 mm
- 2 layers152.4 × 68.6 mm
Pico test synth2
todbot/pico_test_synth
Simple board to help make synths with Raspberry Pi Pico/Pico2 and PCM5102 I2S DAC
55 parts57MIT - 2 layers51.3 × 96.2 mm
Minisynth32
grantek/minisynth32
A 3D-printable MIDI synthesiser inspired by the Roland MT-32 and clumsyMIDI, and powered by the mt32-pi MT-32 emulator.
32 parts45CC-BY-SA-4.0 - 2 layers13 × 1.4 mm
PicoX7
SloeComputers/picoX7
Software simulation of the Yamaha DX7 with a MIDI interface for the Raspberry Pi Pico
31 parts43MIT - 4 layers71 × 100 mm
Oscar components
dchwebb/Oscar
Eurorack 3 Channel Oscilloscope based on ARM STM32F446 MCU
71 parts42Unlicense