
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

ch32 powered mint can game
Ch32v003game is an open-source printed circuit board by atulravi, from the atulravi/mint-can-game repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 56.1 × 44.2 mm with 11 parts on 24 nets, routed with 87 tracks and 10 vias.
Its parts include 3 connectors, 3 switches, 2 resistors and 1 IC. It belongs with the RISC-V boards of this library.
ch32 powered mint can game
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 2 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | Battery_Cell | Battery:Battery_Panasonic_CR2032-HFN_Horizontal_CircularHoles | BT1 |
| 1 | CH32V003FxPx | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | Conn_01x03_Socket | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | HDSP-4830_2 | Display:HDSP-4830 | BAR1 |
| 1 | SW_DPST | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | SW_DPST | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW2 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 56.1 × 44.2 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the atulravi/mint-can-game repository on GitHub, at the commit this page was made from: the board is KiCad/Ch32v003game/Ch32v003game.kicad_pcb and its schematic KiCad/Ch32v003game/Ch32v003game.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).