

Woodpecker
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 795
- Nets
- 709
- Pads
- 2,895
- Tracks, vias
- 7,117, 565
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Mar 2021
- Updated
- 25 Aug 2026
Overview
Woodpecker is an open-source printed circuit board by atuleu, from the atuleu/woodpecker repository on GitHub. It is a 2-layer board with 795 parts on 709 nets, routed with 7,117 tracks and 565 vias.
It is built around the TLC5973D, 1N4148WS and BSS138. Its parts include 240 capacitors, 240 resistors, 90 ICs, 90 diodes and 90 switches.
Main components
3TLC5973D
SOIC-8-40℃~+85℃ 12MHz 21V 3 3% 3V~6V 50mA Built-in DC-DC Over-Temperature Protection (OTP) PWM SOIC-8 LED Drivers ROHSTexas InstrumentsLED Drivers1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
795| Qty | Value | Footprint | References |
|---|---|---|---|
| 150 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R100, R101, R102, R104, R105, R106, R108, R109, R111, R112, R113, R114, R115, R117, R118 +134 |
| 90 | 10.5K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R10, R14, R103, R107, R110, R116, R120, R123, R129, R133, R136, R140, R141, R142, R143 +74 |
| 90 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C11, C101, C105, C109, C111, C115, C119, C121, C125, C127, C129, C131, C133, C135, C139 +74 |
| 90 | 1N4148WS | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +74 |
| 90 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C12, C100, C102, C106, C110, C112, C116, C120, C122, C126, C128, C130, C132, C134, C136 +74 |
| 90 | TLC5973 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23 +74 |
| 60 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C14, C103, C104, C107, C108, C113, C114, C117, C118, C123, C124, C137, C138, C163, C164 +44 |
| 60 | Cherry_MX_LED | woodpecker:SW_Cherry_MX_1.00u_PCB_SMD_LED | SW1, SW10, SW13, SW15, SW16, SW17, SW18, SW19, SW21, SW22, SW23, SW24, SW25, SW26, SW27, SW28 +44 |
| 30 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +14 |
| 30 | PEL12T | woodpecker:PEL12T-4xxxS-S1024 | SW2, SW3, SW5, SW11, SW12, SW14, SW20, SW32, SW33, SW35, SW36, SW38, SW39, SW41, SW42, SW44 +14 |
| 15 | 10k | woodpecker:Potentiometer_Bourns_PTA6043_Single_Slide | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9, RV10, RV11, RV12, RV13, RV14, RV15 |
More from atuleu/woodpecker
6- 2 layers100 × 89 mm

- 2 layers85 × 115 mm

- 2 layers100 × 55 mm

- 2 layers100 × 90 mm

- 2 layers19 × 19 mm

- 2 layers

Similar boards
- 4 layers49.8 × 41.8 mm

Cc1352-swim thermo
mik4el/cc1352-swim-thermo
Software and hardware for dual band radio high accuracy swim thermometer
55 parts2Apache-2.0 - 4 layers

- 2 layers53.3 × 122.4 mm

- 4 layers70 × 54 mm

- 2 layers53 × 53 mm

Hair electrolysis machine
zoemaestra/hair-electrolysis-machine-usb-c
A fork of scd31's hair electrolysis machine but with USB-C and optimised for cheaper assembly with JLCPCB
83 parts168CERN-OHL-P-2.0 - 4 layers315 × 147.2 mm

- 2 layers61.5 × 99.1 mm

Venta LW Controller
Alex9779/Venta-LW-Controller
PCB design and instructions to control a Venta LW airwasher with an ESP32
31 parts26 - 4 layers41.4 × 108 mm

Questions
What parts does the Woodpecker use?
795 parts, built around the TLC5973D, 1N4148WS and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Woodpecker KiCad files?
From the atuleu/woodpecker repository on GitHub, at the commit this page was made from: the board is ecad/woodpecker/woodpecker.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Woodpecker design in my own project?
Its repository states no licence, so its author keeps all rights: ask atuleu before reusing the design.