Skip to the content
4 layers132.7 × 100 mmRobo plater, the printed circuit board in 3D

Robo plater

atopile/ato-fab1

PCB fab scripts

Size
132.7 × 100 mm
Copper layers
4
Thickness
1.6 mm
Parts
241
Nets
251
Pads
882
Tracks, vias
1,913, 208
Pours
6
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
13 Sep 2024
Updated
8 Nov 2024

Overview

Robo plater is an open-source printed circuit board by atopile, from the atopile/ato-fab repository on GitHub. It is a 4-layer board of 132.7 × 100 mm with 241 parts on 251 nets, routed with 1,913 tracks and 208 vias.

Its parts include 104 resistors, 70 capacitors, 51 ICs, 8 connectors and 3 inductors.

Parts

241
QtyValueFootprintReferences
3525V 10uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0805C2, C3, C10, C11, C12, C18, C19, C20, C21, C25, C26, C27, C28, C32, C33, C34 +19
3362.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 10kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R1, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27 +17
2716V 100nF X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C1, C13, C14, C15, C16, C22, C24, C29, C31, C36, C38, C43, C45, C50, C52, C57 +11
1462.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 1MΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R6, R9, R45, R46, R53, R54, R61, R62, R69, R70, R77, R78, R85, R86
862.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 1kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R87, R88, R89, R90, R91, R92, R93, R94
862.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 49.9Ω 0402 Chip Resistor - Surface Mount ROHSlib:R0402R97, R98, R99, R100, R101, R102, R103, R104
7?lib:CONN-SMD_4P-P1.00_SM04B-SRSS-TB-LF-SNJ1, J2, J3, J4, J5, J6, J8
7?lib:LED-SMD_4P-L2.0-W2.0-BRU8, U16, U21, U26, U31, U36, U41
6125mW Thick Film Resistors 150V ±1% ±400ppm/℃ 1Ω 0805 Chip Resistor - Surface Mount ROHSlib:R0805R40, R48, R56, R64, R72, R80
625V 1uF X5R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C23, C30, C37, C44, C51, C58
662.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 1.05kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R44, R52, R60, R68, R76, R84
662.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 1.33kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R41, R49, R57, R65, R73, R81
662.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 36.5Ω 0402 Chip Resistor - Surface Mount ROHSlib:R0402R43, R51, R59, R67, R75, R83
662.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 365Ω 0402 Chip Resistor - Surface Mount ROHSlib:R0402R42, R50, R58, R66, R74, R82
6?lib:WSON-8_L2.0-W2.0-P0.50-TL-EPU12, U17, U22, U27, U32, U37
6?lib:CONN-SMD_P2.00_S2B-PH-SM4-TB-LF-SNU13, U18, U23, U28, U33, U38
6?lib:SOIC-14_L8.7-W3.9-P1.27-LS6.0-BLU15, U20, U25, U30, U35, U40
6?lib:NetTie-2_SMD_Pad0.25mmU14, U19, U24, U29, U34, U39
4?lib:CONN-TH_4P-P5.00_DB127V-5.0-4P-GN-SU47, U48, U50, U51
2100mW Thick Film Resistors 75V ±100ppm/℃ ±1% 2.7kΩ 0603 Chip Resistor - Surface Mount ROHSlib:R0603R11, R12
262.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 23.7kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R7, R95
262.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 4.3kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R8, R96
262.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 4.7kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R2, R3
2?lib:SOP-16_L9.9-W3.9-P1.27-LS6.0-BLU46, U49
2?lib:IND-SMD_L2.5-W2.0_WPN252012HL1, L2
2?lib:VSON-14_L4.0-W3.0-P0.50-BL-EP_TI_DSJU5, U6
2?lib:HDR-SMD_8P-P2.54-V-M-R2-C4-LS7.4U42, U43
2?lib:HDR-TH_4P-P2.54-V-FU9, U45
10.6A, 42V, 1.1MHz Buck Regulatorlib:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BRU44
116V 2.2uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0603C17
16.3V 10uF X5R ±20% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C60
162.5mW 50V ±100ppm/℃ ±1% 25.5kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R4
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 2.8kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R5
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 330Ω 0402 Chip Resistor - Surface Mount ROHSlib:R0402R10
1?lib:QFN-28_L6.0-W6.0-P0.65-BL-EP3.7U10
1?lib:SOD-323_L1.8-W1.3-LS2.5-RDDS1
1?lib:USB-C-SMD_KH-TYPE-C-16PU4
1?lib:TF-SMD_TF-01AU7
1?lib:TSSOP-24_L7.8-W4.4-P0.65-LS6.4-BLU11
1?lib:HDR-SMD_10P-P1.27-V-M-R2-C5-LS5.3U3
1?lib:IND-SMD_L4.0-W4.0L3
1?lib:LED0603-RDLED1
1?lib:WIRELM-SMD_ESP32-S3-WROOM-1U1
1?lib:CONN-TH_XT30PW-MJ7
1?lib:KEY-SMD_4P-L4.2-W3.2-P2.20-LS4.6U2

The 238 most common of 241 parts.

More from atopile/ato-fab

5

Similar boards

  • 4 layers84 × 82 mmToad, the printed circuit board in 3D

    Toad

    travisgoodspeed/goodfet

    An embedded bus adapter for various microcontrollers and radios.

    241 parts333
  • 4 layers202 × 125 mmM17-rru rf, the printed circuit board in 3D

    M17-rru rf

    M17-Project/rru-rf-hw

    Remote Radio Unit - RF board

    241 parts47
  • 4 layers375.1 × 120.5 mmKyeboard, the printed circuit board in 3D

    Kyeboard

    ChristosChristoforou/Keyboard

    Mechanical Keyboard PCB with four layers, two rotary encoder switches and 78 cherry-mx(pcb-mount) switches.

    241 parts1
  • 4 layers90 × 65 mmClock control board, the printed circuit board in 3D

    Clock control board

    lime7git/clock

    Digital clock based on ESP32 and WS281b leds.

    241 parts
  • 4 layers150 × 50 mmTiepieLCR, the printed circuit board in 3D

    TiepieLCR

    martijnschouten/tiepielcr-hardware

    Contains the design files of the TiePieLCR multi-frequency spectrometer front-end

    241 partsGPL-3.0
  • 4 layers101.6 × 142.3 mmBBB Card, the printed circuit board in 3D

    BBB Card

    topilabs/control-card

    240 parts
  • 4 layers243.8 × 171.5 mmNeotron pico, the printed circuit board in 3D

    Neotron pico

    kitspace-test-repos/kicad6-file-collection

    240 partsMIT

Questions

How big is the Robo plater PCB?

It measures 132.7 × 100 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Robo plater use?

241 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Robo plater KiCad files?

From the atopile/ato-fab repository on GitHub, at the commit this page was made from: the board is robo-plater/elec/layout/default/robo-plater.kicad_pcb and its schematic robo-plater/elec/layout/channel/channel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Robo plater design in my own project?

Its repository states no licence, so its author keeps all rights: ask atopile before reusing the design.