Skip to the content
4 layers80 × 131.8 mmSwoop, the printed circuit board in 3D

With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

Size
80 × 131.8 mm
Copper layers
4
Thickness
1.6 mm
Parts
128
Nets
157
Pads
555
Tracks, vias
1,284, 186
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
15 Feb 2024
Updated
22 Jul 2024

Overview

Swoop is an open-source printed circuit board by atopile, from the atopile/swoop repository on GitHub, published under the MIT licence. It is a 4-layer board of 80 × 131.8 mm with 128 parts on 157 nets, routed with 1,284 tracks and 186 vias.

Its parts include 57 capacitors, 40 ICs, 27 resistors, 3 inductors and 1 connector.

README

README.md

swoop

controller and hand

Electronics [blocked] firmware [blocked] 3D files [blocked] License [blocked] Release [blocked]

What is swoop🛫?

With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

Build your own controller

This project is fully open source and designed with atopile, a new language and compiler to design electronics with code.

Latest auto-generated artifacts

Electronics: Gerbers, Bill of material, position files

Firmware

3D Files (STL, STEP files in the future)

Atopile code

The atopile entry point is located here. Clone the repository and install atopile if you'd like to explore further.

Here is how it works:

The three rotation axis, yaw, pitch, roll of the remote each control the same channel on your aircraft. If you tilt your remote to a certain angle, your aircraft will rotate in that same direction with a certain rotational speed. That's what makes this controller so intuitive to use! To start using the remote, simply double click the arming button (the larger button). This will zero the controller to the current position and start streaming the control outputs to the receiver.

yaw, pitch, roll

To control the throttle, which is your aircraft's motor power, simply press the trigger. Inside the controller, a hall sensor precisely keeps track of the trigger position. This makes for a total of four control inputs with yaw, pitch, roll and throttle.

The smaller button on the remote let's you switch the flight mode. Pretty handy to tweak how your aircraft reacts to your control inputs!

Lastly, the remote has an integrated transceiver from the popular open source ExpressLRS project, which makes it compatible with any of their receivers!

Feature list

Here is what we are planning for this controller:

  • Yaw, pitch and roll control angles from the motion of your hand
  • Throttle control through the trigger
  • Arming button (sets zero position and turn control inputs on/off)
  • Flight mode button
  • Embedded ExpressLRS transceiver
  • Rechargeable over USB-C

Documentation & Status

We will share documentation once we've made more progress on the project development. For current status, checkout the product page.

Join us!

Discord

If you are curious about the project, join us on the atopile discord server.

Contributing

If you would like to contribute on atopile, here is what you will need:

For electronics:

  • atopile: here is a guide on how to install it: https://atopile.io/getting-started/
  • ExpressLRS: ELRS is an open source long range communication protocol for remote controlled aircraft. If you would like to test the remote, having compatible hardware will help!

For firmware:

  • PlatformIO: Cross platform firmware development toolchain
  • CRSF for Arduino: Implementation of the CRSF protocol for arduino. We'll be running this library to stream data from the controller microcontroller to the EzpressLRS module
  • ExpressLRS: ELRS is an open source long range communication protocol for remote controlled aircraft. Their firmware will be flashed on the embedded ESP32S2 module within the controller.

Happy Flying!

swoop_test

Parts

128
QtyValueFootprintReferences
2616V 100nF X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C3, C4, C10, C11, C19, C22, C23, C25, C28, C29, C30, C32, C34, C35, C41, C42 +10
1262.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 10kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R1, R2, R14, R15, R16, R17, R18, R19, R21, R22, R25, R26
9TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mmU6, U7, U8, U9, U10, U15, U16, U17, U18
825V 10uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0805C15, C16, C17, C18, C20, C21, C36, C37
825V 1uF X5R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C8, C12, C13, C14, C24, C33, C56, C57
4lib:KEY-SMD_4P-L4.2-W3.2-P2.20-LS4.6U2, U3, U25, U29
4lib:LED-SMD_4P-L2.0-W2.0-BRU32, U33, U34, U35
450V 18pF C0G ±5% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C1, C2, C26, C27
2lib:L0402L2, L3
2lib:SW-TH_TS-1093C-A7B3-D1U36, U37
250V 1.2pF C0G 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C46, C47
250V 10nF X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C43, C44
250V 12pF C0G ±5% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C38, C39
262.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 1kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R3, R20
262.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 27Ω 0402 Chip Resistor - Surface Mount ROHSlib:R0402R4, R5
262.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 2kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R6, R7
262.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 4.7kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R23, R24
1lib:LQFN-56_L7.0-W7.0-P0.4-EPU1
1lib:LGA-12_L2.0-W2.0-P0.50-BLU23
1lib:CONN-SMD_P2.00_S2B-PH-SM4-TB-LF-SNU11
1lib:QFN-24_L4.0-W4.0-P0.50-BL-EP2.6U26
1lib:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BRU14
1lib:QFN-24_L4.0-W4.0-P0.50-BL-EP2.7U22
1lib:USB-C-SMD_KH-TYPE-C-16PU31
1lib:WSON-10_L2.0-W2.0-P0.40-BL-EPU12
1lib:IND-SMD_L2.5-W2.0_WPN252012HL1
1lib:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BLU39
1lib:CONN-SMD_4P-P1.00_SM04B-SRSS-TB-LF-SNJ1
1lib:LGA-28_L5.2-W3.8-P0.50-BLU19
1lib:FC-135R_L3.2-W1.5U20
1lib:HDR-SMD_10P-P1.27-V-M-R2-C5-LS5.3U30
1lib:OSC-SMD_4P-L3.2-W2.5-BLU4
1lib:WIRELM-SMD_ESP32-S3-WROOM-1U24
1lib:LGA-16_L4.5-W3.0-P0.50-BLU21
1lib:VSON-14_L4.0-W3.0-P0.50-BL-EP_TI_DSJU13
1lib:SOIC-8_L5.3-W5.3-P1.27-LS8.0-BLU5
1lib:SOT-23-3_L2.9-W1.3-P0.95-LS2.4-BRU38
1lib:CONN-TH_DB125-2.54-2P-GNU40
1lib:IPEX-SMD_BWIPX-1-001EU28
1lib:OSC-SMD_4P-L2.0-W1.6-BLU27
1100mW Thick Film Resistors ±100ppm/℃ ±1% 1.07kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R8
150V 0.5pF C0G 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C48
150V 0.8pF 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C45
150V 100pF C0G ±5% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C49
150V 2.2nF X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0603C31
150V 470nF X5R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSlib:C0402C40
162.5mW Thick Film Resistors 50V ±1% ±200ppm/℃ 105kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R10
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 16.2kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R12
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 17.8kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R13
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 1MΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R11
162.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 698kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R9
162.5mW Thick Film Resistors ±100ppm/℃ ±1% 3.24kΩ 0402 Chip Resistor - Surface Mount ROHSlib:R0402R27

More from atopile/swoop

10
  • 4 layers100 × 100 mmDebug, the printed circuit board in 3D

    Debug

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    150 parts51MIT
  • 2 layers225.7 × 100.8 mmSx1280imltrt, the printed circuit board in 3D

    Sx1280imltrt

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    17 parts51MIT
  • 2 layers225.7 × 100.8 mmBno055, the printed circuit board in 3D

    Bno055

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    10 parts51MIT
  • 2 layers225.7 × 100.8 mmMpu6050, the printed circuit board in 3D

    Mpu6050

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    6 parts51MIT
  • 2 layers225.7 × 100.8 mmLis3mdltr, the printed circuit board in 3D

    Lis3mdltr

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    5 parts51MIT
  • 2 layers225.7 × 100.8 mmDrv5053raqdbzr, the printed circuit board in 3D

    Drv5053raqdbzr

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    4 parts51MIT
  • 2 layers225.7 × 100.8 mmAh3772-sa-7, the printed circuit board in 3D

    Ah3772-sa-7

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    3 parts51MIT
  • 2 layers225.7 × 100.8 mmBmi088, the printed circuit board in 3D

    Bmi088

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    3 parts51MIT
  • 2 layers225.7 × 100.8 mmDrv2605ldgsr, the printed circuit board in 3D

    Drv2605ldgsr

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    3 parts51MIT
  • 2 layers225.7 × 100.8 mmSk6805-ec20, the printed circuit board in 3D

    Sk6805-ec20

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    2 parts51MIT

Similar boards

  • 4 layers71.1 × 89.6 mmModule 16S, the printed circuit board in 3D

    Module 16S

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    128 parts1.1k
  • 4 layers85.6 × 53.8 mmMuVox, the printed circuit board in 3D

    MuVox

    muvox-io/muVox

    Open Source Hardware Audio Amplifier

    128 parts84
  • 4 layers125.7 × 76.5 mmUGC Main, the printed circuit board in 3D

    UGC Main

    HandHeldLegend/GC-Ultimate

    The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .

    128 parts62
  • 4 layers50 × 50 mmSimpleFC, the printed circuit board in 3D

    SimpleFC

    wangyeee/OpenHardware

    Collections of hardware design related to my drone project.

    128 parts10BSD-3-Clause
  • 4 layers60 × 44 mmPAC5523, the printed circuit board in 3D

    PAC5523

    Jana-Marie/OtterControlNG

    Next generation of OtterControl.

    128 parts9
  • 4 layers99.8 × 94.6 mmOresat proto card, the printed circuit board in 3D

    Oresat proto card

    oresat/oresat-proto-card

    Prototype card for the OreSat bus. Requires the OreSat Backplane.

    128 parts9
  • 4 layers50 × 56 mmVocore, the printed circuit board in 3D

    Vocore

    oshwlab/osbean-board

    Boards for OSBean.

    128 parts4
  • 4 layers86.3 × 97.1 mmHellen-112-17, the printed circuit board in 3D

    Hellen-112-17

    rusefi/hellen-112-17

    128 parts4

Questions

How big is the Swoop PCB?

It measures 80 × 131.8 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Swoop use?

128 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Swoop KiCad files?

From the atopile/swoop repository on GitHub, at the commit this page was made from: the board is elec/layout/default/swoop.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Swoop design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).