Skip to the content
2 layers225.7 × 100.8 mmLis3mdltr, the printed circuit board in 3D

With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

Size
225.7 × 100.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
8
Pads
20
Tracks, vias
22, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
15 Feb 2024
Updated
22 Jul 2024

Overview

Lis3mdltr is an open-source printed circuit board by atopile, from the atopile/swoop repository on GitHub, published under the MIT licence. It is a 2-layer board of 225.7 × 100.8 mm with 5 parts on 8 nets, routed with 22 tracks and 0 vias.

Its parts include 3 capacitors, 1 resistor and 1 IC.

README

README.md

swoop

controller and hand

Electronics [blocked] firmware [blocked] 3D files [blocked] License [blocked] Release [blocked]

What is swoop🛫?

With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

Build your own controller

This project is fully open source and designed with atopile, a new language and compiler to design electronics with code.

Latest auto-generated artifacts

Electronics: Gerbers, Bill of material, position files

Firmware

3D Files (STL, STEP files in the future)

Atopile code

The atopile entry point is located here. Clone the repository and install atopile if you'd like to explore further.

Here is how it works:

The three rotation axis, yaw, pitch, roll of the remote each control the same channel on your aircraft. If you tilt your remote to a certain angle, your aircraft will rotate in that same direction with a certain rotational speed. That's what makes this controller so intuitive to use! To start using the remote, simply double click the arming button (the larger button). This will zero the controller to the current position and start streaming the control outputs to the receiver.

yaw, pitch, roll

To control the throttle, which is your aircraft's motor power, simply press the trigger. Inside the controller, a hall sensor precisely keeps track of the trigger position. This makes for a total of four control inputs with yaw, pitch, roll and throttle.

The smaller button on the remote let's you switch the flight mode. Pretty handy to tweak how your aircraft reacts to your control inputs!

Lastly, the remote has an integrated transceiver from the popular open source ExpressLRS project, which makes it compatible with any of their receivers!

Feature list

Here is what we are planning for this controller:

  • Yaw, pitch and roll control angles from the motion of your hand
  • Throttle control through the trigger
  • Arming button (sets zero position and turn control inputs on/off)
  • Flight mode button
  • Embedded ExpressLRS transceiver
  • Rechargeable over USB-C

Documentation & Status

We will share documentation once we've made more progress on the project development. For current status, checkout the product page.

Join us!

Discord

If you are curious about the project, join us on the atopile discord server.

Contributing

If you would like to contribute on atopile, here is what you will need:

For electronics:

  • atopile: here is a guide on how to install it: https://atopile.io/getting-started/
  • ExpressLRS: ELRS is an open source long range communication protocol for remote controlled aircraft. If you would like to test the remote, having compatible hardware will help!

For firmware:

  • PlatformIO: Cross platform firmware development toolchain
  • CRSF for Arduino: Implementation of the CRSF protocol for arduino. We'll be running this library to stream data from the controller microcontroller to the EzpressLRS module
  • ExpressLRS: ELRS is an open source long range communication protocol for remote controlled aircraft. Their firmware will be flashed on the embedded ESP32S2 module within the controller.

Happy Flying!

swoop_test

Parts

5
QtyValueFootprintReferences
2Multilayer Ceramic Capacitors MLCC - SMD/SMT 100nF 10V 0402 RoHSlib:C0402C1, C3
1lib:LGA-12_L2.0-W2.0-P0.50-BLU1
1Chip Resistor - Surface Mount 1.1KOhms ±5% 1/16W 0402 RoHSlib:R0402R1
1Multilayer Ceramic Capacitors MLCC - SMD/SMT 1uF 6.3V 0402 RoHSlib:C0402C2

More from atopile/swoop

10
  • 4 layers100 × 100 mmDebug, the printed circuit board in 3D

    Debug

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    150 parts51MIT
  • 4 layers80 × 131.8 mmSwoop, the printed circuit board in 3D

    Swoop

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    128 parts51MIT
  • 2 layers225.7 × 100.8 mmSx1280imltrt, the printed circuit board in 3D

    Sx1280imltrt

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    17 parts51MIT
  • 2 layers225.7 × 100.8 mmBno055, the printed circuit board in 3D

    Bno055

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    10 parts51MIT
  • 2 layers225.7 × 100.8 mmMpu6050, the printed circuit board in 3D

    Mpu6050

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    6 parts51MIT
  • 2 layers225.7 × 100.8 mmDrv5053raqdbzr, the printed circuit board in 3D

    Drv5053raqdbzr

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    4 parts51MIT
  • 2 layers225.7 × 100.8 mmAh3772-sa-7, the printed circuit board in 3D

    Ah3772-sa-7

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    3 parts51MIT
  • 2 layers225.7 × 100.8 mmBmi088, the printed circuit board in 3D

    Bmi088

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    3 parts51MIT
  • 2 layers225.7 × 100.8 mmDrv2605ldgsr, the printed circuit board in 3D

    Drv2605ldgsr

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    3 parts51MIT
  • 2 layers225.7 × 100.8 mmSk6805-ec20, the printed circuit board in 3D

    Sk6805-ec20

    atopile/swoop

    With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.

    2 parts51MIT

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Lis3mdltr PCB?

It measures 225.7 × 100.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lis3mdltr use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lis3mdltr KiCad files?

From the atopile/swoop repository on GitHub, at the commit this page was made from: the board is elec/src/lis3mdltr/elec/layout/default/lis3mdltr.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lis3mdltr design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).