2 layers113 × 56.3 mm
MP1Flight
TangoPush/MP1Flight
STM32MP1 based flight controller based off the Pixracer.
72 parts5CC0-1.0
2 layers120 × 75 mm
Rpi5-cnc hat
atomicmill/raspberry-pi-5-Linuxcnc-hat1Raspberry Pi 5 Linuxcnc hat KiCad proect
- Size
- 120 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 86
- Pads
- 374
- Tracks, vias
- 661, 42
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Aug 2024
- Updated
- 22 Aug 2024
Overview
Rpi5-cnc hat is an open-source printed circuit board by atomicmill, from the atomicmill/raspberry-pi-5-Linuxcnc-hat repository on GitHub. It is a 2-layer board of 120 × 75 mm with 96 parts on 86 nets, routed with 661 tracks and 42 vias.
It is built around the 74LVC2G34GW, TSR 1-2433 and TSR 1-2450, with the Π120U30 among its other parts. Its parts include 31 connectors, 30 capacitors, 23 ICs, 5 resistors and 5 diodes. It belongs with the robots and motor control boards of this library.
Main components
4
74LVC2G34GW
SOT-363-40℃~+125℃ 1.65V~5.5V 2 2 2.5ns@3.3V,50pF 24mA 24mA 4uA 74LVC Power-off isolation、Level shifting Schmitt trigger Unidirectional SOT-363 Buffers, Drivers, Receivers, Transceivers ROHSMDDBuffers, Drivers, Receivers, Transceivers
TSR 1-2433
SIP,11.6x7.5mm-40℃~+85℃ 1 10.2mm 11.6mm 1A 2200uF 3.3V 300uA 50mVp-p 6V~36V 7.5mm 80%、90% 850kHz Plastic encapsulated type Short Circuit Protection、Automatic fault recovery Step-down type ±1% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesTSR 1-2450
SIP,11.6x7.5mm-40℃~+85℃ 10.2mm 11.6mm 1A 2200uF 300uA 50mVp-p 5V 7.5mm 7V~36V 850kHz 94% Short Circuit Protection、Automatic fault recovery ±1% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power Modules
Π120U30
SOIC-8-40℃~+125℃ 0 150Kbps 150kV/us 2 3000 3V~5.5V 3V~5.5V 3us Fail-safe output、Multi-voltage domain interface Low Level SOIC-8 Digital Isolators ROHS2Pai SemiDigital Isolators
README
README.mdRaspberry Pi 5 Linuxcnc hat KiCad proect
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +10 |
| 16 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal | J16, J17, J18, J19, J20, J21, J22, J23, J24, J25, J26, J27, J28, J29, J30, J31 |
| 13 | π120U30 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U5, U7, U9, U11, U13, U14, U15, U16, U17, U18, U20, U22 |
| 8 | 74LVC2G34 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U4, U6, U8, U10, U12, U19, U21, U23 |
| 6 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J2, J3, J4, J5, J6, J10 |
| 6 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J7, J11, J12, J13, J14, J15 |
| 5 | LED_Small_Filled | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4, R5 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28, C30 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8, J9 |
| 2 | Polyfuse_Small | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1, F2 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C29 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C27 |
| 1 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | Raspberry_Pi | RPI:raspberrypi | J1 |
| 1 | TSR_1-2433 | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U2 |
| 1 | TSR_1-2450 | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U1 |
Questions
How big is the Rpi5-cnc hat PCB?
It measures 120 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rpi5-cnc hat use?
96 parts, built around the 74LVC2G34GW, TSR 1-2433, TSR 1-2450 and Π120U30. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rpi5-cnc hat KiCad files?
From the atomicmill/raspberry-pi-5-Linuxcnc-hat repository on GitHub, at the commit this page was made from: the board is rpi5-cnc-hat.kicad_pcb and its schematic driver-output.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rpi5-cnc hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask atomicmill before reusing the design.
Similar boards
- 2 layers98.3 × 93.3 mm
Power Control Unit PCB
BLESS-BEXUS/Power-Control-Unit-System-PCB
Open-source PCB for power distribution and regulation from a 28 V DC input to 3.3 V, 5 V and 12 V regulated rails.
30 parts - 2 layers59.7 × 60.7 mm
- 2 layers101.6 × 60.1 mm
- 2 layers132 × 70 mm
EnvNodeMini
magicamun/EnvNode
EnvNode is an source-available ESP32-based embedded platform for reliable environmental measurements and seamless integration into modern home automation systems.
20 parts - 4 layers100 × 100 mm
Pmic test board
efabless/foss-asic-tools
FOSS-ASIC-TOOLS is all in one container for SKY130 based design both Analog and Digital. Below is a list of the current tools already installed and ready to use.
205 parts121Apache-2.0 - 4 layers100 × 70 mm
Psu control
introlab/t-top
T-Top is a tabletop robot designed with advanced audio and vision sensors, deep learning perceptual processing and telecommunication capabilities to provide richer interaction modalities and develop higher cognitive…
122 parts20 - 4 layers180 × 120 mm
MG ZS V2
damienmaguire/MG-EV-Inverter
Reverse engineering of the drive motor and inverter used in MG Electric Vehicles
177 parts17GPL-3.0