2 layers191.2 × 129.5 mm
2 layers165.1 × 134.9 mm
Jonkey v1
AtomicJon/jonkey33The JONKEY is a columnar split keyboard created using ergogen.
- Size
- 165.1 × 134.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 147
- Nets
- 58
- Pads
- 722
- Tracks, vias
- 932, 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Mar 2022
- Updated
- 22 Oct 2025
Overview
Jonkey v1 is an open-source printed circuit board by AtomicJon, from the AtomicJon/jonkey repository on GitHub. It is a 2-layer board of 165.1 × 134.9 mm with 147 parts on 58 nets, routed with 932 tracks and 1 via.
Its parts include 36 diodes and 36 switches. It belongs with the keyboards and input boards of this library.
README
README.mdJONKEY
The JONKEY is a columnar split keyboard created using ergogen.
v2
What's New
- Swap thumb layout
- Added encoder mounts
- Added screen
- TODO: Touchpad mount
Project Contents
- Ergogen Config: jonkey-v2.yml
- PCB Design: pcbs/
- 3D Printable case: TODO
- QMK Config: qmk_config/
v1
Project Contents
- Ergogen Config: jonkey.yml
- PCB Design: v1/pcbs/v1.1/
- 3D Printable case: case/
- QMK Config: qmk_config/
Notes
- The PCB is a single reversible board, flip it over for the right side
- The Pro Micros need to be attached upside down on the left and right side up on the right for the correct pin alignments
- Currently the QMK firmware has the side hardcoded and needs to be complied individually for each side. To switch between compiling the left/right side firmware, uncomment the appropriate line in the config.h (Lines 16/17)
- There are free pins (D2, D3) that could be used for high/low indication of side
Parts
147| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | PG1350 | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +20 | |
| 36 | ComboDiode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 | |
| 1 | ProMicro | MCU1 | |
| 1 | SW_RST | TACT_SWITCH_TVBP06 | B1 |
The 74 most common of 147 parts.
Questions
How big is the Jonkey v1 PCB?
It measures 165.1 × 134.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Jonkey v1 use?
147 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jonkey v1 KiCad files?
From the AtomicJon/jonkey repository on GitHub, at the commit this page was made from: the board is v1/pcbs/v1/jonkey-v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jonkey v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask AtomicJon before reusing the design.
More from AtomicJon/jonkey
1Similar boards
- 2 layers327.9 × 139 mm
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
147 parts446 - 2 layers139.1 × 107.7 mm
Lotus58 Glow 150
TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family
147 parts390 - 2 layers100 × 100 mm
- 2 layers58.5 × 88 mm
Fugu2
fl4p/Fugu2
Links: git | kicanvas | cadlab | docs | pdf schematics | IBOM (TODO) | firmware | additional docs & resources
147 parts24 - 2 layers60.5 × 100 mm
Opensolar
junglejim8/opensolar
Maximum Power Point Tracking Solar Charge Controller 100V input, 65amp
147 parts23 - 2 layers101.6 × 99.7 mm
Karabas nano karabas nano revB
PCBench/PCBench
resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…
147 parts21MIT - 2 layers71.1 × 114.5 mm
- 2 layers55.9 × 121.3 mm
Tregatti stable
tregatti-tech/ESP32ECG
Open design/code version of ECG device based on esp32
147 parts9