2 layers34 × 34 mm
Main board tft
atomic14/cube-display
I'm currently testing the first set of PCBs. There will be updates as I find issues!
48 parts2
4 layers48 × 35.1 mm
Micro esp32-s3
atomic14/esp32-tv-hardware29This is Work In Progress - I'm still working on this.
- Size
- 48 × 35.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 87
- Pads
- 337
- Tracks, vias
- 736, 153
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Nov 2023
- Updated
- 10 Dec 2023
Overview
Micro esp32-s3 is an open-source printed circuit board by atomic14, from the atomic14/esp32-tv-hardware repository on GitHub. It is a 4-layer board of 48 × 35.1 mm with 81 parts on 87 nets, routed with 736 tracks and 153 vias.
It is built around the ESP32-S3-WROOM-1-N8, MAX98357AETE+T and DM3D-SF, with the IRM-H638T/TR2, OWMMOD-403010A-S261F and TP4057 among its other parts. Its parts include 31 resistors, 21 capacitors, 9 ICs, 7 diodes and 4 transistors. It belongs with the ESP32 boards of this library.
Main components
12
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
MAX98357AETE+T
TQFN-16-EP(3x3)-40℃~+85℃ 2.4mA 2.5V~5.5V 3.2Wx1@4Ω 77dB 92% Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture Class D TQFN-16-EP(3x3) Audio Amplifiers ROHSMaxim Integrated (Analog Devices)Audio Amplifiers
DM3D-SF
SMD-25℃~+85℃ 1.55mm Connector and Ejector MicroSD Card (TF Card) No Push-Pull SMD SD Card / Memory Card Connector ROHSHirose ElectricSD Card / Memory Card Connector
IRM-H638T/TR2
SMD-4P,5x4mm-25℃~+85℃ 1.2mA 2.7V~5.5V 38kHz 45°、45° SMD-4P,5x4mm Infrared Remote Receiver (IRM) ROHSEverlight ElectronicsInfrared Remote Receiver (IRM)OWMMOD-403010A-S261F
SMD-8P,4x3mm-26dB 1.1mA 1mm 3.6V 3mm 4mm 62dB Omnidirectional pickup SMD-8P,4x3mm MEMS Microphones ROHSOle Wolff Electronics Inc.MEMS Microphones
TP4057
SOT-23-6-40℃~+85℃ 1 25uA 4.24V 4V~6.5V Charging IC Lithium Battery Not supported SOT-23-6 Battery Management ROHSTECH PUBLICBattery Management
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
BAS5202VH6327XTSA1
Schottky diode 45V/750mA in a SOD-523 package.Infineon TechnologiesUncategorised
NTA4151PT1G-HXY
SOT-523-55℃~+150℃ 1 P-Channel 115pF 150mW 15pF 20V 560mΩ@4.5V 660mA 700mV 9pF P-Channel Standalone SOT-523 MOSFETs ROHSHXY MOSFETMOSFETs
B3U-3000P
SMD,3x2.5mm-25℃~+70℃ 1.2mm 1.59N 12V 2.5mm 3mm 50mA Black IP40 Rectangular Button SMD(SMT) Tab SPST Surface Mount, Right Angle Without Bracket SMD,3x2.5mm Tactile Switches ROHSOmronTactile Switches
SM04B-SRSS-TB(LF)(SN)(P)
-UncategorisedJST
TPNTA4153NT1G
SOT-523-55℃~+150℃ 1 N-channel 1.1V 120pF 15pF 20V 20pF 280mW 300mΩ@2.5V 800mA SOT-523 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdWIP - ESP32-TV Hardware Files
This is Work In Progress - I'm still working on this.
This repo contains/will contain the hardware design files for the ESP32-TV project.
Schematic
You can either open this up in KiCad, or there's a PDF here.
PCB
Open this up in KiCad to export the Gerber files.
What's this all about?
More details to follow...
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10K | Resistor_SMD:R_0402_1005Metric | R13, R19, R20, R21, R22, R23, R24, R26, R27, R28, R29, R30, R31 |
| 8 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C8, C10, C11, C12, C13, C20, C21 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C16, C17, C19 |
| 5 | 220R | Resistor_SMD:R_0402_1005Metric | R5, R6, R8, R9, R11 |
| 4 | 10uF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C18 |
| 4 | 5.1K | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R7 |
| 3 | 100K | Resistor_SMD:R_0402_1005Metric | R1, R14, R17 |
| 3 | 12K | Resistor_SMD:R_0402_1005Metric | R10, R12, R25 |
| 3 | BAS5202VH6327XTSA1 | BAS5202VH6327XTSA1:SODFL1608X59N | D1, D6, D7 |
| 3 | NTA4151PT1G | NTA4151PT1G:SOT50P160X90-3N | Q1, Q2, Q3 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C14, C15 |
| 2 | B3U-3000P | B3U-3000P:SW_B3U-3000P | S1, S2 |
| 2 | S2B-ZR-SM4A-TF_LF__SN_ | S2B-ZR-SM4A-TF_LF__SN_:JST_S2B-ZR-SM4A-TF_LF__SN_ | BAT1, SPK1 |
| 1 | 1.69_Rounded_FPC | display_0_69:fpc_12_pin_0.7_pitch | U7 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 47 | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 634K | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | BLUE | LED_SMD:LED_0402_1005Metric | D4 |
| 1 | Crystal_GND24 (24MHz) | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DM3D-SF | DM3D-SF:DM3DSF | J3 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1U | U2 |
| 1 | GREEN | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | IRM-H638T/TR2 | IRM-H638M3_TR2:SOP254P700X405-4N | IC1 |
| 1 | LOGO | qwiic:qwiic | G*** |
| 1 | MAX98357AETE+T | MAX98357AETE:Maxim_Electronics-21-0896-0-0-0 | U3 |
| 1 | NCP167BMX330TBG | NCP167BMX330TBG:VREG_NCP167BMX330TBG | U1 |
| 1 | OWMMOD-403010A-S261F | OWMMOD-403010A-S261F:MIC_OWMMOD-403010A-S261F | U8 |
| 1 | RED | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | SM04B-SRSS-TB_LF__SN_ | SM04B-SRSS-TB_LF__SN_:JST_SM04B-SRSS-TB_LF__SN_ | QWIIC1 |
| 1 | TP4057 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | TPNTA4153NT1G | Package_TO_SOT_SMD:SOT-523 | Q4 |
| 1 | TYPE-C-31-M-12 | TYPE-C-31-M-12:HRO_TYPE-C-31-M-12 | J1 |
| 1 | USB2244 | Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP4.1x4.1mm | U5 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U6 |
| 1 | YELLOW | LED_SMD:LED_0402_1005Metric | D5 |
Questions
How big is the Micro esp32-s3 PCB?
It measures 48 × 35.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Micro esp32-s3 use?
81 parts, built around the ESP32-S3-WROOM-1-N8, MAX98357AETE+T, DM3D-SF and IRM-H638T/TR2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Micro esp32-s3 KiCad files?
From the atomic14/esp32-tv-hardware repository on GitHub, at the commit this page was made from: the board is kicad/micro-esp32-s3.kicad_pcb and its schematic kicad/micro-esp32-s3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Micro esp32-s3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask atomic14 before reusing the design.
Similar boards
- 2 layers48.7 × 44.9 mm
Esp32-crystal ball
atomic14/esp32-crystal-balls
This PCB is now supporting two of my projects: Crystal Balls and my Flame Lamp.
54 parts10 - 2 layers38 × 151.9 mm
Ruller battery
rapha-tech/ESP-32-ruler
PCB ruler featuring an ESP-32 module, push-buttons and an OLED screen
56 parts - 4 layers38.4 × 128.5 mm
- 4 layers38.4 × 128.5 mm
Plantpal
rajeev2705/PROJECTS
Welcome to my PCB projects repository! This space is dedicated to documenting my journey in designing, creating, and improving printed circuit boards (PCBs).
127 parts - 4 layers66 × 142 mm
- 4 layers40 × 80 mm
- 4 layers138.1 × 104.6 mm
V7-kaleido
vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.
140 parts75CC-BY-SA-4.0