

Code for my 6502 build
- Size
- 102.5 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 65
- Pads
- 130
- Tracks, vias
- 219, 65
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Nov 2019
- Updated
- 19 Jul 2026
Overview
Via is an open-source printed circuit board by atarola, from the atarola/compy6502 repository on GitHub. It is a 2-layer board of 102.5 × 30 mm with 8 parts on 65 nets, routed with 219 tracks and 65 vias.
Its parts include 4 connectors, 2 capacitors and 2 ICs. It belongs with the retro computing and games boards of this library.
README
README.mdcompy6502
compy6502 is an early-stage 6502 homebrew computer project. The long-term
goal is to build enough hardware and firmware to run Tetris on the machine.
The design follows the spirit of Ben Eater-style breadboard/modular 6502
systems for simplicity and debuggability, but uses a different memory map based
on the MMU/address-decoder architecture in docs/mmu.png.
The repo currently includes KiCad hardware designs, early ROM bring-up
firmware, build/write scripts, emulator test scaffolding, and architecture
reference images in docs/.
Memory Map
The intended memory map is:
$0000-$BFFF RAM
$C000-$C0FF I/O page
$C100-$FFFF ROMThe I/O page is split into four 64-byte device slots:
$C000-$C03F IO0B
$C040-$C07F IO1B
$C080-$C0BF IO2B
$C0C0-$C0FF IO3BThe linker script currently uses $8000-$FFFF as the 32 KB EEPROM image range
so CPU addresses map directly to the correct physical offsets on the chip.
ROM Layout
The intended ROM organization is:
$C100-$C1FF public jump table
$C200-$DFFF kernel routines and drivers
$E000-$EFFF enhanced monitor
$F500-$FFF9 Wozmon fallback monitor
$FFFA-$FFFF CPU vectorsCredits
docs/mmu.png: Mike McLaren, K8LH.docs/Beater 02b.png: Mike McLaren, K8LH.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 1 | 7400 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U2 |
| 1 | Board Connector | Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_Horizontal | J1 |
| 1 | IO Selector | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J4 |
| 1 | Port A | Connector_PinHeader_2.00mm:PinHeader_1x12_P2.00mm_Horizontal | J2 |
| 1 | Port B | Connector_PinHeader_2.00mm:PinHeader_1x12_P2.00mm_Horizontal | J3 |
| 1 | W65C22NxP | Package_DIP:DIP-40_W15.24mm_Socket_LongPads | U1 |
More from atarola/compy6502
9- 2 layers190.5 × 105 mm

- 2 layers102.5 × 30 mm

- 2 layers102.5 × 44.8 mm

- 2 layers105.4 × 30 mm

- 2 layers102.5 × 30 mm

- 2 layers102.5 × 30 mm

- 2 layers49.5 × 30 mm

- 2 layers102.5 × 30 mm

- 2 layers102.5 × 30 mm

Similar boards
- 2 layers20.5 × 24.8 mm

- 2 layers14.4 × 10.5 mm

OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm

Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm

USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm

7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm

PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm

PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the Via PCB?
It measures 102.5 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Via use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Via KiCad files?
From the atarola/compy6502 repository on GitHub, at the commit this page was made from: the board is kicad/via/via.kicad_pcb and its schematic kicad/ACIA/ACIA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Via design in my own project?
Its repository states no licence, so its author keeps all rights: ask atarola before reusing the design.