Skip to the content
2 layers49.5 × 30 mmDe9, the printed circuit board in 3D

Code for my 6502 build

Size
49.5 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
8
Pads
29
Tracks, vias
28, 15
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
24 Nov 2019
Updated
19 Jul 2026

Overview

De9 is an open-source printed circuit board by atarola, from the atarola/compy6502 repository on GitHub. It is a 2-layer board of 49.5 × 30 mm with 7 parts on 8 nets, routed with 28 tracks and 15 vias.

It belongs with the retro computing and games boards of this library.

README

README.md

compy6502

compy6502 is an early-stage 6502 homebrew computer project. The long-term goal is to build enough hardware and firmware to run Tetris on the machine.

The design follows the spirit of Ben Eater-style breadboard/modular 6502 systems for simplicity and debuggability, but uses a different memory map based on the MMU/address-decoder architecture in docs/mmu.png.

The repo currently includes KiCad hardware designs, early ROM bring-up firmware, build/write scripts, emulator test scaffolding, and architecture reference images in docs/.

Memory Map

The intended memory map is:

text
$0000-$BFFF  RAM
$C000-$C0FF  I/O page
$C100-$FFFF  ROM

The I/O page is split into four 64-byte device slots:

text
$C000-$C03F  IO0B
$C040-$C07F  IO1B
$C080-$C0BF  IO2B
$C0C0-$C0FF  IO3B

The linker script currently uses $8000-$FFFF as the 32 KB EEPROM image range so CPU addresses map directly to the correct physical offsets on the chip.

ROM Layout

The intended ROM organization is:

text
$C100-$C1FF  public jump table
$C200-$DFFF  kernel routines and drivers
$E000-$EFFF  enhanced monitor
$F500-$FFF9  Wozmon fallback monitor
$FFFA-$FFFF  CPU vectors

Credits

  • docs/mmu.png: Mike McLaren, K8LH.
  • docs/Beater 02b.png: Mike McLaren, K8LH.

Parts

7
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_PadH1, H2, H3, H4
1SPI 1Connector_JST:JST_XH_B6B-XH-AM_1x06_P2.50mm_VerticalJ1
1SPI 2Connector_JST:JST_XH_B6B-XH-AM_1x06_P2.50mm_VerticalJ3
1TerminalConnector_Dsub:DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mmJ2

More from atarola/compy6502

9
  • 2 layers190.5 × 105 mmBackplane, the printed circuit board in 3D

    Backplane

    atarola/compy6502

    Code for my 6502 build

    53 parts
  • 2 layers102.5 × 30 mmMmu, the printed circuit board in 3D

    Mmu

    atarola/compy6502

    Code for my 6502 build

    22 parts
  • 2 layers102.5 × 44.8 mmSpi, the printed circuit board in 3D

    Spi

    atarola/compy6502

    Code for my 6502 build

    20 parts
  • 2 layers105.4 × 30 mmPanel, the printed circuit board in 3D

    Panel

    atarola/compy6502

    Code for my 6502 build

    15 parts
  • 2 layers102.5 × 30 mmACIA, the printed circuit board in 3D

    ACIA

    atarola/compy6502

    Code for my 6502 build

    11 parts
  • 2 layers102.5 × 30 mmCpu, the printed circuit board in 3D

    Cpu

    atarola/compy6502

    Code for my 6502 build

    10 parts
  • 2 layers102.5 × 30 mmVia, the printed circuit board in 3D

    Via

    atarola/compy6502

    Code for my 6502 build

    8 parts
  • 2 layers102.5 × 30 mmRam, the printed circuit board in 3D

    Ram

    atarola/compy6502

    Code for my 6502 build

    5 parts
  • 2 layers102.5 × 30 mmRom, the printed circuit board in 3D

    Rom

    atarola/compy6502

    Code for my 6502 build

    4 parts

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the De9 PCB?

It measures 49.5 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the De9 use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the De9 KiCad files?

From the atarola/compy6502 repository on GitHub, at the commit this page was made from: the board is kicad/de9/de9.kicad_pcb and its schematic kicad/ACIA/ACIA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the De9 design in my own project?

Its repository states no licence, so its author keeps all rights: ask atarola before reusing the design.