Skip to the content
2 layers49.8 × 39.6 mmSHARP Mem Display BP, the printed circuit board in 3D

SHARP Memory LCD example for MSP430 LaunchPad

Size
49.8 × 39.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
15
Pads
88
Tracks, vias
118, 17
Pours
2
Routed
Yes
KiCad
KiCad 3
Created
19 Nov 2012
Updated
24 Sep 2014

Overview

SHARP Mem Display BP is an open-source printed circuit board by astuder, from the astuder/MSP430-sharp-LS013B4DN02-memory-display repository on GitHub. It is a 2-layer board of 49.8 × 39.6 mm with 17 parts on 15 nets, routed with 118 tracks and 17 vias.

Its parts include 6 connectors and 3 capacitors. It belongs with the lEDs and displays boards of this library.

README

README.md

Example of using SHARP Memory LCD LS013B4DN04 with MSP430G2553

This is a simple library for TI MSP430G2553 to write characters to SHARP LS013B4DN04 Memory Display using USCI for hardware SPI.

SHARP LS013B4DN04 is a very low power 1.35 inch, 96x96 pixel LCD display. It uses less than 15 uW when displaying a static image. http://www.sharpmemorylcd.com/1-35-inch-memory-lcd.html

This code also works with the predecessor LS013B4DN02 and should work with any display of that series with compatible pinouts.

The project also includes a matching BoosterPack to mount the display on a MSP430 LaunchPad. More information about the BoosterPack can be found on 43oh: http://forum.43oh.com/topic/4979-sharp-memory-display-booster-pack/

Pinout MSP430 -> Display

  • P1.0: LED (VCOM status display)
  • P1.5: SCLK (SPI clock)
  • P1.7: SI (SPI data)
  • P2.0: DISP (display on/off)
  • P2.5: SCS (SPI chip select)
  • GND: GND
  • VCC: VDD and VDDA

After adjusting for different pin-out (DISP,SCS), this code also works with the official SHARP LCD BoosterPack by Texas Instruments. http://www.ti.com/tool/430BOOST-SHARP96

This code should also work with the Adafruit SHARP Memory Display Breakout http://www.adafruit.com/products/1393

A library and example for Energia can be found in the Energia subfolder of this project. This library should also work with Arduino (untested).

Parts

17
QtyValueFootprintReferences
21 uFSM0805C2, C3
1.1 uFSM0805C1
143oh_logo_smaller43oh_logo_smallerVAL
1CSGS2JP2
1DISPGS2JP5
1Display FPCKyocera_FPC_6288_10P4
1Display ZebraSHARP_Mem_Disp_ZebraP3
1EXTINGS2JP4
1EXTMODGS3JP7
1LaunchPad LeftSIL-10-WP1
1LaunchPad Left 2SIL-10-WP5
1LaunchPad RightSIL-10-WP2
1LaunchPad Right 2SIL-10-WP6
1MOSIGS2JP1
1SCLKGS2JP3
1VDDGS3JP6

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the SHARP Mem Display BP PCB?

It measures 49.8 × 39.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SHARP Mem Display BP use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SHARP Mem Display BP KiCad files?

From the astuder/MSP430-sharp-LS013B4DN02-memory-display repository on GitHub, at the commit this page was made from: the board is KiCad/SHARP Mem Display BP.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the SHARP Mem Display BP design in my own project?

Its repository states no licence, so its author keeps all rights: ask astuder before reusing the design.