

Astropix v5 conn
- Size
- 56.4 × 74 mm
- Copper layers
- 4
- Thickness
- 1.57 mm
- Parts
- 50
- Nets
- 136
- Pads
- 307
- Tracks, vias
- 836, 102
- Pours
- 289
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Feb 2026
- Updated
- 8 Oct 2026
Overview
Astropix v5 conn is an open-source printed circuit board by AstroPix, from the AstroPix/astropix-pcbs repository on GitHub. It is a 4-layer board of 56.4 × 74 mm with 50 parts on 136 nets, routed with 836 tracks and 102 vias.
Its parts include 16 capacitors, 11 connectors, 10 resistors and 1 IC.
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | .1uF | Capacitor_SMD:C_0603_1608Metric | C2, C9, C10, C12, C16, C17, C18 |
| 5 | 22 | Resistor_SMD:R_0402_1005Metric | R10, R11, R12, R13, R14 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C11, C13 |
| 3 | 1nF | Capacitor_SMD:C_0603_1608Metric | C1, C6, C8 |
| 3 | HBOut | Connector_Coaxial:SMA_Molex_73251-2200_Horizontal | J1, J4, J5 |
| 2 | 2k2 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID3, FID4 |
| 2 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP4, JP5 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H4, H5 |
| 2 | TestPoint | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1, TP2 |
| 1 | .1uF | Capacitor_SMD:C_1210_3225Metric | C15 |
| 1 | 0k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 100 nF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1nF | Capacitor_SMD:C_1210_3225Metric | C14 |
| 1 | AstroPix5_split_powerring | astropix:AstroPix5_v2 | U2 |
| 1 | Bias | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Horizontal | J14 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | HV_in_external | Connector_Coaxial:SMA_Molex_73251-2200_Horizontal | J7 |
| 1 | HV_logo | astropix:hv | Logo5 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | KIT_logo | astropix:logo | Logo4 |
| 1 | Measures_Analog | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | SPI_left | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | SPI_right | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J10 |
| 1 | bonder | astropix:bonder | H6 |
| 1 | pcie_GECCO | Connector_PCBEdge:BUS_PCIexpress_x16_ilo | J3 |
Similar boards
- 4 layers36 × 69 mm

- 4 layers55 × 35 mm

Pocketbeagle
beagleboard/pocketbeagle
BeagleBoard.org PocketBeagle - ultra small, ultra flexible, ultra affordable
50 parts284CC-BY-4.0 - 4 layers44 × 48 mm

- 4 layers51 × 48 mm

- 4 layers116.8 × 121.8 mm

Se30
rhalkyard/SEthernet
Modern, low-cost 10/100 Ethernet for the Macintosh SE and SE/30
50 parts167GPL-3.0 - 4 layers126.6 × 37.7 mm

Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition
50 parts101MIT - 4 layers36 × 77 mm

- 4 layers100 × 100 mm

Questions
How big is the Astropix v5 conn PCB?
It measures 56.4 × 74 mm and has 4 copper layers, 1.57 mm thick.
What parts does the Astropix v5 conn use?
50 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Astropix v5 conn KiCad files?
From the AstroPix/astropix-pcbs repository on GitHub, at the commit this page was made from: the board is AstroPix5/astropix_v5_conn.kicad_pcb and its schematic AstroPix3/astropix_v3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Astropix v5 conn design in my own project?
Its repository states no licence, so its author keeps all rights: ask AstroPix before reusing the design.