2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0
2 layers76 × 96.1 mm
Project x
asrob-uc3m/project-x4Carreras de coches RC en FPV
- Size
- 76 × 96.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 28
- Pads
- 89
- Tracks, vias
- 158, 17
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 23 Oct 2018
- Updated
- 13 Jun 2019
Overview
Project x is an open-source printed circuit board by asrob-uc3m, from the asrob-uc3m/project-x repository on GitHub. It is a 2-layer board of 76 × 96.1 mm with 33 parts on 28 nets, routed with 158 tracks and 17 vias.
Its parts include 8 connectors, 6 resistors, 4 diodes, 2 ICs and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdproject-x
Carreras de coches RC en FPV
[Image blocked: No description]Materiales
Coche
Control & FPV
Otros materiales posibles
No están siendo usados por el prototipo oficial, pero sí por otros prototipos:
Atribuciones
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4, R5, R6 |
| 4 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1, J2, J5, J8 |
| 3 | LED | LEDs:LED_0805_HandSoldering | D1, D2, D3 |
| 1 | Arduino_PRO_Micro | def-footprints:Board_Arduino_Pro_Micro | XA1 |
| 1 | CQY99 | LEDs:LED_D5.0mm | D4 |
| 1 | Conn_01x05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J7 |
| 1 | DC_Converter_RT8272 | def-footprints:Board_DC_DC_module_RT8272 | U2 |
| 1 | I2C | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J4 |
| 1 | Jumper_NO_Small | def-footprints:Miscellaneous_Solder_Jumper | JP1 |
| 1 | LOGO | def-footprints:Logo_ASROB_2.5x2.5_cm | G*** |
| 1 | LOGO | def-footprints:Logo_Project_X | G*** |
| 1 | SW_DPST | def-footprints:Switches_Push_Switch_THD | SW1 |
| 1 | Serial | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | SoftSerial | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J6 |
| 1 | TSOP382xx | Opto-Devices:IRReceiver_Vishay_MINICAST-3pin | U1 |
The 25 most common of 33 parts.
Questions
How big is the Project x PCB?
It measures 76 × 96.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Project x use?
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Project x KiCad files?
From the asrob-uc3m/project-x repository on GitHub, at the commit this page was made from: the board is hardware/pcb/project-x.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Project x design in my own project?
Its repository states no licence, so its author keeps all rights: ask asrob-uc3m before reusing the design.
Similar boards
- 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
