

Stencil
My design files. Abandon all hope ye who enter here.
- Size
- 16 × 16 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 11
- Pads
- 40
- Tracks, vias
- 127, 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Stencil is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 16 × 16 mm with 7 parts on 11 nets, routed with 127 tracks and 5 vias.
It is built around the ATTINY84A-MU. Its parts include 3 resistors, 1 capacitor, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistors_SMD:R_0805 | R1, R2, R3 |
| 1 | 0.1 uF | Capacitors_SMD:C_0805 | C1 |
| 1 | ATTINY84A-M | myFootPrints:QFN-20-1EP_4x4mm_Pitch0.5mm | IC1 |
| 1 | LED_RGB | myFootPrints:LED_RGB_5050 | D1 |
The 6 most common of 7 parts.
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 4 layers17.8 × 19 mm

- 2 layers16.5 × 19 mm

- 2 layers9.5 × 6 mm

Attiny x4-x5 adapter
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
3 parts253GPL-3.0 - 2 layers

Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT - 2 layers40 × 20 mm

- 2 layers19.8 × 30 mm

- 2 layers35.6 × 58.2 mm

Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm

Questions
How big is the Stencil PCB?
It measures 16 × 16 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stencil use?
7 parts, built around the ATTINY84A-MU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stencil KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/archive/Attiny84Heart/stencil.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stencil design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.