Skip to the content
2 layers41.9 × 30 mmDesign files, the printed circuit board in 3D

Design files

aspro648/KiCad33

My design files. Abandon all hope ye who enter here.

Size
41.9 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
5
Pads
65
Tracks, vias
81, 0
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Design files is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 41.9 × 30 mm with 31 parts on 5 nets, routed with 81 tracks and 0 vias.

Its parts include 8 connectors, 4 diodes, 2 resistors and 1 switch.

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

31
QtyValueFootprintReferences
111pinmyFootPrints:MOUSEBITEx3B3, B3, B3, B3, B3, B3, B3, B3, B3, B3, B3
8CONN_01X01footprints:SEWPADJ1, J2, J3, J4, J5, J6, J7, J8
2100footprints:Resistor_HorzR1, R2
2LEDfootprints:LED_D3.0mmD11, D22
2LEDfootprints:LED_D5.0mmD1, D2
1Battery_Cellfootprints:BATT_CR2032BT1
1G***svg2mod:edge_cuts2svg2mod
1MB225revmyFootPrints:MB225revVAL
1MadeInOregonRev25myFootPrints:MadeInOregonRev25VAL
1SW_SPSTfootprints:mySwitchDPDTSW1

The 30 most common of 31 parts.

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 2 layers44.5 × 46.9 mmOSO SWAT B1-jig, the printed circuit board in 3D

    OSO SWAT B1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    31 parts2.1k
  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    31 parts1kGPL-3.0
  • 2 layers191 × 98.5 mmMacroKeypad, the printed circuit board in 3D

    MacroKeypad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    31 parts915
  • 2 layers39 × 45.2 mmCH32V003F4P6-R0-1v1, the printed circuit board in 3D

    CH32V003F4P6-R0-1v1

    openwch/ch32v003

    CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

    31 parts599
  • 2 layers26.7 × 27.9 mmBreakout board, the printed circuit board in 3D

    Breakout board

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    31 parts546MIT
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    31 parts447MIT
  • 2 layers77.2 × 69.8 mmCubesatsim solar, the printed circuit board in 3D

    Cubesatsim solar

    alanbjohnston/CubeSatSim

    CubeSatSim, the AMSAT CubeSat Simulator

    31 parts419GPL-3.0
  • 2 layers103 × 55 mmTd neck-294, the printed circuit board in 3D

    Td neck-294

    tdaede/td-crt

    tubes

    31 parts373

Questions

How big is the Design files PCB?

It measures 41.9 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Design files use?

31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Design files KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/LEDeyes/design_files/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Design files design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.