

Design files Attiny85 V1
My design files. Abandon all hope ye who enter here.
- Size
- 25 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 20
- Pads
- 59
- Tracks, vias
- 162, 10
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files Attiny85 V1 is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 25 × 20 mm with 21 parts on 20 nets, routed with 162 tracks and 10 vias.
It is built around the ATTINY25-15M. Its parts include 8 resistors, 8 connectors, 2 fuses, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100 | footprints:R_0805 | R1, R2, R3, R4, R5, R6, R7, R8 |
| 2 | PTC | footprints:R_0805_HandSoldering | F1, F2 |
| 1 | 0.1uF | footprints:C_0805 | C1 |
| 1 | ATTINY25 | footprints:SOIJ-8_5.3x5.3mm_Pitch1.27mm | IC1 |
| 1 | BAT | footprints:PIN_HEADER_LED | J3 |
| 1 | CHG | footprints:Connector_Molex_PicoBlade_53047-0210 | J1 |
| 1 | FL | footprints:Pin_Header_THD_1x03 | J8 |
| 1 | HL | footprints:Pin_Header_THD_1x03 | J4 |
| 1 | ISP | footprints:Pin_Header_Straight_2x03_Pitch2.54mm | CON1 |
| 1 | JST-SH | footprints:JST_SH_SM02B_hand_solder | J5 |
| 1 | SW_SPDT | footprints:JS102011SCQN | SW1 |
| 1 | TL | footprints:Pin_Header_THD_1x03 | J2 |
| 1 | UL | footprints:Pin_Header_THD_1x03 | J6 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers65 × 56 mm

- 2 layers49.5 × 49.5 mm

MarcoPoloTTLSerialTester
cellularmitosis/MarcoPoloTTLSerialTester
A board for testing a TTL Serial communication channel.
39 partsMIT - 2 layers57 × 43 mm

- 2 layers100 × 100 mm

Abort Module
CodapopKSP/UntitledSpaceCraft
The entire project files from the Untitled Space Craft brand of Kerbal controllers.
27 parts40GPL-3.0 - 2 layers16.9 × 24.5 mm

- 2 layers28.3 × 39.8 mm

LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm

Questions
How big is the Design files Attiny85 V1 PCB?
It measures 25 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files Attiny85 V1 use?
21 parts, built around the ATTINY25-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files Attiny85 V1 KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/HotWheels/Attiny/design_files Attiny85 V1/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files Attiny85 V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.