Skip to the content
2 layers25 × 20 mmDesign files Attiny85 V0, the printed circuit board in 3D

Design files Attiny85 V0

aspro648/KiCad33

My design files. Abandon all hope ye who enter here.

Size
25 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
18
Pads
51
Tracks, vias
141, 7
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Design files Attiny85 V0 is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 25 × 20 mm with 18 parts on 18 nets, routed with 141 tracks and 7 vias.

It is built around the ATTINY25-15M. Its parts include 8 resistors, 7 connectors, 1 capacitor, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

18
QtyValueFootprintReferences
8100footprints:R_0805R1, R2, R3, R4, R5, R6, R7, R8
10.1uFfootprints:C_0805C1
1ATTINY25Housings_SOIC:SOIJ-8_5.3x5.3mm_Pitch1.27mmIC1
1BATfootprints:PIN_HEADER_LEDJ3
1CHGConnectors_Molex:Connector_Molex_PicoBlade_53047-0210J1
1FLfootprints:Pin_Header_THD_1x03J8
1HLfootprints:Pin_Header_THD_1x03J2
1ISPPin_Header_Straight_2x03_Pitch2.54mmCON1
1SW_SPDTfootprints:JS102011SCQNSW1
1TLfootprints:Pin_Header_THD_1x03J4
1ULfootprints:Pin_Header_THD_1x03J6

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 2 layers65 × 56 mmRpi with supply, the printed circuit board in 3D

    Rpi with supply

    cnlohr/cnpihats

    My various pi hats.

    48 parts1MIT
  • 2 layers49.5 × 49.5 mmMarcoPoloTTLSerialTester, the printed circuit board in 3D

    MarcoPoloTTLSerialTester

    cellularmitosis/MarcoPoloTTLSerialTester

    A board for testing a TTL Serial communication channel.

    39 partsMIT
  • 2 layers57 × 43 mmRbcrash, the printed circuit board in 3D

    Rbcrash

    onitake/rbcrash

    Remote controlled high power RGB LED lamp

    42 parts
  • 2 layers100 × 100 mmAbort Module, the printed circuit board in 3D

    Abort Module

    CodapopKSP/UntitledSpaceCraft

    The entire project files from the Untitled Space Craft brand of Kerbal controllers.

    27 parts40GPL-3.0
  • 2 layers27.9 × 16.5 mmPowerSSO-24 breakout, the printed circuit board in 3D

    PowerSSO-24 breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    18 parts1.2k
  • 2 layers42.7 × 13.7 mmStm32-mini12864, the printed circuit board in 3D

    Stm32-mini12864

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    18 parts1.1kGPL-3.0
  • 2 layers41.2 × 46.6 mmThumb cluster left, the printed circuit board in 3D

    Thumb cluster left

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    18 parts993

Questions

How big is the Design files Attiny85 V0 PCB?

It measures 25 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Design files Attiny85 V0 use?

18 parts, built around the ATTINY25-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Design files Attiny85 V0 KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/HotWheels/Attiny/design_files Attiny85 V0/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Design files Attiny85 V0 design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.