

Design files press LPS25HB breakout
My design files. Abandon all hope ye who enter here.
- Size
- 11.4 × 11.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 8
- Pads
- 18
- Tracks, vias
- 43, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files press LPS25HB breakout is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 11.4 × 11.4 mm with 3 parts on 8 nets, routed with 43 tracks and 2 vias.
It is built around the LPS25HB. Its parts include 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x04_Left | footprints:Pin_Header_Left | J1 |
| 1 | Conn_01x04_Right | footprints:Pin_Header_Right | J3 |
| 1 | LPS25HB | footprints:ST_HLGA-10_2.5x2.5mm_P0.6mm_LayoutBorder3x2y | U1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 4 layers68.1 × 66 mm

Ambient
lab11/signpost
Exploring what happens when you put computers on sign posts.
63 parts97Apache-2.0 - 4 layers135 × 82.5 mm

- 4 layers103 × 82.4 mm

- 4 layers164 × 118 mm

- 2 layers84 × 29 mm

Main+front
pioupiou-archive/pioupiou-v1-electronics
This repository contains the electronic parts of the Pioupiou V1 wind sensor.
44 parts4 - 2 layers40 × 50 mm

ProgArm
ProgArm/ProgArm-Hardware
This repository contains only schematic and PCB files. Schematic PDF and Gerber files are attached to every release.
131 parts3GPL-3.0 - 4 layers80.2 × 80.2 mm

- 4 layers160 × 118 mm

Questions
How big is the Design files press LPS25HB breakout PCB?
It measures 11.4 × 11.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files press LPS25HB breakout use?
3 parts, built around the LPS25HB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files press LPS25HB breakout KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Beetje/archive/design_files_press_LPS25HB breakout/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files press LPS25HB breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.