

Design files
My design files. Abandon all hope ye who enter here.
- Size
- 38.1 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 50
- Pads
- 139
- Tracks, vias
- 388, 14
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 38.1 × 20.3 mm with 20 parts on 50 nets, routed with 388 tracks and 14 vias.
It is built around the 74HCT1G125GV, MIC5225-3.3YM5 and MBR120. Its parts include 4 capacitors, 4 ICs, 3 diodes, 3 connectors and 2 resistors. It belongs with the SAM D and SAM boards of this library.
Main components
374HCT1G125GV
SOT-753-40℃~+125℃ 1 1 11ns@4.5V,50pF 20uA 4.5V~5.5V 6mA 6mA 74HCT Tri-State Unidirectional SOT-753 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversMIC5225-3.3YM5
SOT23-53.3V 150mA Ultra-Low Current uCap Low Dropout RegulatorMicrochip TechnologyUncategorisedMBR120
SOD-123Schottky DiodesDoeshare
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | footprints:C_0805 | C6, C8 |
| 2 | 1uF | footprints:C_0603 | C1, C7 |
| 2 | Conn_01x14 | footprints:Pin_Header_Straight_1x14_Pitch2.54mm | J2, J4 |
| 2 | MBR120 | footprints:D_SOD-123F | D1, D4 |
| 1 | 100K | footprints:R_0603 | R9 |
| 1 | 180 | footprints:R_0603 | R7 |
| 1 | 74HCT1G125 | footprints:TSOP-5_1.65x3.05mm_Pitch0.95mm | U3 |
| 1 | AVR-ISP-6 | AVR-ISP-6 | CON1 |
| 1 | D4 | footprints:SW_SPST_KMR2 | SW2 |
| 1 | LED | footprints:LED_0603 | D13 |
| 1 | MB85RS16 | footprints:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | MIC5225-3.3 | footprints:SOT-23-5 | U2 |
| 1 | MadeInOregonRev25 | myFootPrints:MadeInOregonRev25 | VAL |
| 1 | RESET | footprints:SW_SPST_KMR2 | SW1 |
| 1 | SAMD21G18A | footprints:TQFP-48_7x7mm_Pitch0.5mm | IC1 |
| 1 | USB_OTG | footprints:USB_Micro-B_Molex-105017-0001 | X3 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers35.6 × 17.8 mm

Adafruit adafruit itsybitsy m0 pcb adafruit itsybitsy m0
oomlout/oomlout_oomp_project_bot_v_2
28 parts - 2 layers299.2 × 112.1 mm

- 2 layers50.8 × 22.9 mm

Classic MIDI FeatherWing
hajdbo/Classic_MIDI_FeatherWing
A classic MIDI interface FeatherWing with provisions for DIN-5 and TRS TypeB connectors.
21 parts - 2 layers11.4 × 98.4 mm

- 2 layers31 × 30.5 mm

Christmas tree barrier
Petezah/roomba_wall_v2
An AVR program for ATTiny85 to transmit a virtual wall signal for an iRobot Roomba
17 parts32GPL-3.0 - 2 layers76.3 × 105.1 mm

- 2 layers28 × 20 mm

TMF882xBreakout
generationmake/TMF882xBreakout
Breakout board for the ams TMF8820, TMF8821 and TMF8828 multi-zone time-of-flight sensors
27 parts1 - 2 layers28 × 20 mm

TMF8801Breakout
generationmake/TMF8801Breakout
Breakout board for the ams TMF8801 1D time-of-flight sensor
27 parts1
Questions
How big is the Design files PCB?
It measures 38.1 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files use?
20 parts, built around the 74HCT1G125GV, MIC5225-3.3YM5 and MBR120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/SAMD21/design_files/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.