Skip to the content
2 layers48 × 31 mmDesign files Stryfe MOSFET V01, the printed circuit board in 3D

Design files Stryfe MOSFET V01

aspro648/KiCad33

My design files. Abandon all hope ye who enter here.

Size
48 × 31 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
6
Pads
19
Tracks, vias
61, 0
Pours
3
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Design files Stryfe MOSFET V01 is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 48 × 31 mm with 12 parts on 6 nets, routed with 61 tracks and 0 vias.

Its parts include 4 connectors, 1 resistor, 1 diode, 1 transistor and 1 fuse.

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

12
QtyValueFootprintReferences
2MOUNTfootprints:SolderWirePad_single_2-5mmDrillJ14, J14
110Kfootprints:R__P7mmR1
1BATTfootprints:Terminal_no_silkBT1
1FUSEfootprints:Fuse_Littelfuse-LVR125F1
1KICKBACKfootprints:D_DO-41D1
1LOGOfootprints:stryfeG***
1MOSFETfootprints:TO-220-3_HorizontalQ1
1MTRSfootprints:Terminal_no_silkM1
1REV_SWfootprints:Molex_PicoBlade_53047-0210_02x1.25mm_StraightJ1
1SOLDERfootprints:Pin_Header_Straight_1x02_Pitch2.00mmJ3
1Val**footprints:schRef**

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Design files Stryfe MOSFET V01 PCB?

It measures 48 × 31 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Design files Stryfe MOSFET V01 use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Design files Stryfe MOSFET V01 KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Nerf/ArduStryfe_MOSFET/design_files Stryfe MOSFET V01/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Design files Stryfe MOSFET V01 design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.