Skip to the content
2 layers14 × 8 mmBase, the printed circuit board in 3D

My design files. Abandon all hope ye who enter here.

Size
14 × 8 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
19
Pads
69
Tracks, vias
127, 4
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Base is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 14 × 8 mm with 27 parts on 19 nets, routed with 127 tracks and 4 vias.

It is built around the ATTINY84-20MU. Its parts include 12 connectors, 6 diodes, 5 resistors, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

27
QtyValueFootprintReferences
10CONN_01X01footprints:testPadP0, P1, P2, P3, P4, PG0, PG1, PG2, PG3, PG4
2LEDfootprints:LED_0201D3, D4
2LEDfootprints:LED-0805D0, D5
10.1 uFCapacitors_SMD:C_0805_HandSolderingC1
1330footprints:R_0603R1
1330footprints:R_0201R3
1330footprints:R_01005R4
1330footprints:R_0805R0
1330footprints:R_0402R2
1ATTINY84-20MUHousings_DFN_QFN:QFN-20-1EP_4x4mm_Pitch0.5mmU1
1AVR-ISP-6footprints:AVR-ISP-6CON1
1Batteryfootprints:BATT_CR2032_SMDBT1
1CONN_01X01footprints:Pin_Header_Straight_1x01P5
1LEDfootprints:LED-0603D1
1LEDfootprints:LED_0402D2
1LOGOdesign_files:eyeG***

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 2 layers47.6 × 27.3 mmMmc usb 1, the printed circuit board in 3D

    Mmc usb 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    27 parts1.2k
  • 2 layers77.4 × 77.4 mmCORAZON LEDS CON FADE, the printed circuit board in 3D

    CORAZON LEDS CON FADE

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    27 parts915
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers22 × 42 mmNvme bm to e, the printed circuit board in 3D

    Nvme bm to e

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    27 parts253GPL-3.0
  • 2 layers80 × 61 mmPicoProducer, the printed circuit board in 3D

    PicoProducer

    pjgpetecodes/pico-streamdeck

    This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

    27 parts230MIT
  • 2 layers186 × 45 mmAddOnD, the printed circuit board in 3D

    AddOnD

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    27 parts226CC-BY-SA-4.0
  • 2 layers29.6 × 40.6 mmDbwifi revB, the printed circuit board in 3D

    Dbwifi revB

    ugcs/ddc

    Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

    27 parts223

Questions

How big is the Base PCB?

It measures 14 × 8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Base use?

27 parts, built around the ATTINY84-20MU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Base KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/archive/Attiny85ChallengeMisery/design_files/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Base design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.