

Base
My design files. Abandon all hope ye who enter here.
- Size
- 88.9 × 27.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 22
- Pads
- 72
- Tracks, vias
- 170, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Base is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 88.9 × 27.9 mm with 27 parts on 22 nets, routed with 170 tracks and 2 vias.
Its parts include 8 resistors, 8 diodes, 4 connectors, 2 ICs and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 330 | myFootPrints:Resistor_Horz | R0, R1, R2, R3, R4, R5, R6, R7 |
| 8 | LED | myFootPrints:LED-3MM | D0, D1, D2, D3, D4, D5, D6, D7 |
| 2 | CONN_01X01 | myFootPrints:Lego_Drill | P2, P2 |
| 1 | 0.1 uF | myFootPrints:C1 | C1 |
| 1 | ATTINY84-S | Housings_DIP:DIP-14_W7.62mm | IC1 |
| 1 | AVR-ISP-6 | myFootPrints:AVR-ISP-6 | CON1 |
| 1 | Battery | myFootPrints:BATT_12mm_TH | BT1 |
| 1 | CONN_01X01 | project_footprints:Pin_Header_Straight_1x01 | P1 |
| 1 | MLX92231 | TO_SOT_Packages_THT:TO-92_Inline_Wide | U1 |
| 1 | MadeInOregonRev25 | myFootPrints:MadeInOregonRev25 | VAL |
| 1 | SPST | myFootPrints:SW_SPST | SW2 |
| 1 | SW_PUSH | myFootPrints:SW_PUSH_SMALL | SW1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers47.6 × 27.3 mm

- 2 layers77.4 × 77.4 mm

CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm

- 2 layers40 × 40 mm

- 2 layers22 × 42 mm

Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm

PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm

AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm

Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223
Questions
How big is the Base PCB?
It measures 88.9 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Base use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Base KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/archive/Attiny84SpinnerTHD/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Base design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.