

Base
My design files. Abandon all hope ye who enter here.
- Size
- 88.9 × 27.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 22
- Pads
- 77
- Tracks, vias
- 152, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Base is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 88.9 × 27.9 mm with 29 parts on 22 nets, routed with 152 tracks and 0 vias.
Its parts include 8 resistors, 8 diodes, 6 connectors, 2 ICs and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 330 | myFootPrints:Resistor_Horz | R0, R1, R2, R3, R4, R5, R6, R7 |
| 8 | LED | myFootPrints:LED-3MM | D0, D1, D2, D3, D4, D5, D6, D7 |
| 4 | CONN_01X01 | myFootPrints:Lego_Drill | P2, P2, P2, P2 |
| 1 | 0.1 uF | myFootPrints:C1 | C1 |
| 1 | ATTINY84-S | Housings_DIP:DIP-14_W7.62mm | IC1 |
| 1 | AVR-ISP-6 | myFootPrints:AVR-ISP-6 | CON1 |
| 1 | Battery | myFootPrints:BATT_CR2032 | BT1 |
| 1 | CONN_01X01 | project_footprints:Pin_Header_Straight_1x01 | P1 |
| 1 | MLX92231 | TO_SOT_Packages_THT:TO-92_Inline_Wide | U1 |
| 1 | MadeInOregonRev25 | myFootPrints:MadeInOregonRev25 | VAL |
| 1 | SPST | myFootPrints:mySwitchDPDT | SW2 |
| 1 | SW_PUSH | myFootPrints:SW_PUSH_SMALL | SW1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers52.3 × 10.5 mm

StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
29 parts5.1kGPL-3.0 - 2 layers56 × 20 mm

HallEffectXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
29 parts1.1kGPL-3.0 - 2 layers50 × 23.2 mm

Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers16.8 × 13.6 mm

E Fidget Lite
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
29 parts915 - 2 layers85 × 12.5 mm

TERES PCB3-TOUCH BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
29 parts578Apache-2.0 - 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers80 × 55 mm

- 2 layers55 × 58 mm

Questions
How big is the Base PCB?
It measures 88.9 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Base use?
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Base KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/archive/Attiny84SpinnerTHD_R2/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Base design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.