

Base
My design files. Abandon all hope ye who enter here.
- Size
- 26 × 39 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 20
- Pads
- 111
- Tracks, vias
- 351, 26
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Base is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 26 × 39 mm with 40 parts on 20 nets, routed with 351 tracks and 26 vias.
Its parts include 25 diodes, 5 resistors, 2 switches, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | LED | LEDs:LED-1206 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9 |
| 5 | R | Resistors_SMD:R_1206 | R1, R2, R3, R4, R5 |
| 1 | 0.1 uF | Capacitors_SMD:C_1206 | C1 |
| 1 | ATTINY84-S | SMD_Packages:SOIC-14_N | IC1 |
| 1 | AVR-ISP-6 | Pin_Headers:Pin_Header_Straight_2x03 | CON1 |
| 1 | Battery | myFootPrints:BATT_CR2032_SMD | BT1 |
| 1 | MadeInOregonRev25 | myFootPrints:MadeInOregonRev25 | VAL |
| 1 | SPST | myFootPrints:mySwitchDPDT | SW1 |
| 1 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_EVQPE1 | SW2 |
| 1 | VAL** | myFootPrints:QFN-16 | Test |
The 38 most common of 40 parts.
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers139.7 × 73.7 mm

- 2 layers149.4 × 177.4 mm

Lightsculpture
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
40 parts915 - 2 layers150 × 50 mm

EleLab v2 Bus150
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
40 parts531GPL-3.0 - 2 layers66.4 × 48.1 mm

Raspberry
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
40 parts456 - 2 layers44 × 44 mm

- 2 layers90.8 × 53.3 mm

- 2 layers59.6 × 109.5 mm

Drop
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
40 parts410 - 2 layers123.8 × 73.5 mm

Questions
How big is the Base PCB?
It measures 26 × 39 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Base use?
40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Base KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/archive/Attiny84LED/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Base design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.