Skip to the content
2 layers27 × 27 mmBase, the printed circuit board in 3D

My design files. Abandon all hope ye who enter here.

Size
27 × 27 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
12
Pads
57
Tracks, vias
116, 3
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Base is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 27 × 27 mm with 11 parts on 12 nets, routed with 116 tracks and 3 vias.

It is built around the ATTINY84A-MU. Its parts include 3 resistors, 2 connectors, 2 switches, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

11
QtyValueFootprintReferences
10.1 uFCapacitors_SMD:C_0805_HandSolderingC1
1ATTINY84A-MmyFootPrints:QFN-20-1EP_4x4mm_Pitch0.5mmIC1
1AVR-ISP-6myFootPrints:AVR-ISP-6CON1
1BResistors_SMD:R_0805_HandSolderingR3
1BatterymyFootPrints:BATT_CR2032_SMDBT1
1CONN_01X01Pin_Headers:Pin_Header_Straight_1x01P1
1GResistors_SMD:R_0805_HandSolderingR2
1LED_RGBLED_RGB_QBLP679ED1
1RResistors_SMD:R_0805_HandSolderingR1
1SPSTSPST_SMDSW2
1SW_PUSHSW_SMD_PUSHSW1

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 4 layers17.8 × 19 mmRing motion rgb, the printed circuit board in 3D

    Ring motion rgb

    whatnick/lantern_ring

    Lantern Corps Style Ring, SW/HW/Jewellery Design

    22 parts3
  • 2 layers9.5 × 6 mmAttiny x4-x5 adapter, the printed circuit board in 3D

    Attiny x4-x5 adapter

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    3 parts253GPL-3.0
  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915

Questions

How big is the Base PCB?

It measures 27 × 27 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Base use?

11 parts, built around the ATTINY84A-MU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Base KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/archive/Attiny84Heart/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Base design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.