Skip to the content
2 layers44 × 50 mmBase, the printed circuit board in 3D

My design files. Abandon all hope ye who enter here.

Size
44 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
8
Pads
29
Tracks, vias
91, 6
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Base is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 44 × 50 mm with 15 parts on 8 nets, routed with 91 tracks and 6 vias.

Its parts include 2 connectors, 1 capacitor, 1 resistor, 1 diode and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

15
QtyValueFootprintReferences
10.1 uFCapacitors_SMD:C_1206_HandSolderingC1
1330Resistors_SMD:R_1206_HandSolderingR1
1ATTINYHousings_SOIC:SOIJ-8_5.3x5.3mm_Pitch1.27mmATTINY
1AVR-ISP-6myFootPrints:AVR-ISP-6CON1
1BatterymyFootPrints:BATT_CR2032_SMDBT1
1CONN_01X01Pin_Headers:Pin_Header_Straight_1x01P1
1LEDLEDs:LED-1206D1
1LOGOmyFootPrints:OSHWA2G***
1LOGOmyFootPrints:OSHWAG***
1LOGOmyFootPrints:OSHParkG***
1LOGOmyFootPrints:OSHParkPurpleG***
1MB225revmyFootPrints:MB225revVAL
1MadeInOregonRev25myFootPrints:MadeInOregonRev25VAL
1SW_PUSHButtons_Switches_SMD:SW_SPST_EVQP0SW1

The 14 most common of 15 parts.

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Base PCB?

It measures 44 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Base use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Base KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/Attiny85SMD_OSHPark/design_files/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Base design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.