

Base
My design files. Abandon all hope ye who enter here.
- Size
- 31.5 × 31.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 10
- Pads
- 35
- Tracks, vias
- 101, 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Base is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 31.5 × 31.5 mm with 12 parts on 10 nets, routed with 101 tracks and 4 vias.
Its parts include 4 connectors, 2 switches, 1 capacitor, 1 resistor and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | CONN_01X01 | Pin_Headers:Pin_Header_Straight_1x01 | P1, P2, P3 |
| 1 | 0.1 uF | Capacitors_SMD:C_1206_HandSoldering | C1 |
| 1 | 330 | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | ATTINY85-S | Housings_SOIC:SOIJ-8_5.3x5.3mm_Pitch1.27mm | ATTINY1 |
| 1 | AVR-ISP-6 | myFootPrints:AVR-ISP-6 | CON1 |
| 1 | Battery | myFootPrints:BATT_CR2032_SMD | BT1 |
| 1 | LED | LEDs:LED-1206 | D1 |
| 1 | LOGO | myFootPrints:IheartSMD | G*** |
| 1 | SPST | SPST_SMD | SW1 |
| 1 | SW_PUSH | myFootPrints:SW_SMD_PUSH | SW2 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers

Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT - 2 layers66.9 × 74.5 mm

- 2 layers40 × 15 mm

Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm

- 2 layers26 × 16.9 mm

- 2 layers49 × 25 mm

5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm

Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm

Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696
Questions
How big is the Base PCB?
It measures 31.5 × 31.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Base use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Base KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/archive/Attiny85HeartSMD2/design_files/base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Base design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.