
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

Daughter board for ALPS RK27 motorised pot
Alps rk27 is an open-source printed circuit board by asitwouldseem, from the asitwouldseem/alps-kicad repository on GitHub, published under the MIT licence. It is a 2-layer board of 44 × 48 mm with 7 parts on 5 nets, routed with 15 tracks and 0 vias.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | |||
| 1 | ONE | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | R_Potentiometer_Dual | alps-kicad:Alps_RK27 | RV1 |
| 1 | TWO | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
The 4 most common of 7 parts.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 44 × 48 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the asitwouldseem/alps-kicad repository on GitHub, at the commit this page was made from: the board is alps-rk27.kicad_pcb and its schematic alps-rk27.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).