Skip to the content
2 layersInst mp, the printed circuit board in 3D

My old Junior year EDD project from 2020 (this was all on zoom)

Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
7
Pads
15
Tracks, vias
34, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
23 Aug 2022
Updated
26 May 2025

Overview

Inst mp is an open-source printed circuit board by Asik007, from the Asik007/Febris repository on GitHub. It is a 2-layer board with 3 parts on 7 nets, routed with 34 tracks and 0 vias.

It is built around the AD8422AR. Its parts include 1 resistor, 1 IC and 1 connector.

Main components

1

README

README.md

Febris

My old Junior year EDD project from 2020 (this was all on zoom)

If your interested in the PCB files and such make an issue and Ill see if I can find them

Hosted at asik007.github.io/Febris

Parts

3
QtyValueFootprintReferences
1AD8422Package_DIP:DIP-8_W7.62mm_LongPadsU1
1Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1
1R_SmallResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1

More from Asik007/Febris

1
  • 2 layers75 × 50 mmUhhh, the printed circuit board in 3D

    Uhhh

    Asik007/Febris

    My old Junior year EDD project from 2020 (this was all on zoom)

    18 parts

Similar boards

  • 4 layers90 × 140 mmEeg hardware v1, the printed circuit board in 3D

    Eeg hardware v1

    es-ude/eeg-hardware

    Repo of the Custom Hardware Design Files of the EEG-based Gaming Controller

    460 partsMIT
  • 4 layers64 × 40.4 mmSaleae current sensor, the printed circuit board in 3D

    Saleae current sensor

    zainahm3d/saleae-current-sensor

    +-5A and +-40A isolated hall effect current sensor solution for saleae logic devices.

    54 parts
  • 2 layers40 × 30 mmBlinky, the printed circuit board in 3D

    Blinky

    earthtojake/text-to-cad

    Design physical products with AI

    3 parts26kMIT
  • 2 layers51.9 × 16 mmPassive2-rpi non standard adapter, the printed circuit board in 3D

    Passive2-rpi non standard adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    3 parts4.4kGPL-2.0
  • 2 layers16.3 × 16.3 mmSensor, the printed circuit board in 3D

    Sensor

    scottbez1/splitflap

    DIY split-flap display

    3 parts4.2k
  • 2 layersSub, the printed circuit board in 3D

    Sub

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    3 parts4kMIT
  • 2 layers85 × 30 mmDual stomp, the printed circuit board in 3D

    Dual stomp

    torvalds/GuitarPedal

    Linus learns analog circuits

    3 parts2.5kGPL-2.0

Questions

What parts does the Inst mp use?

3 parts, built around the AD8422AR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Inst mp KiCad files?

From the Asik007/Febris repository on GitHub, at the commit this page was made from: the board is Project Files (PCB and Code)/idk/inst_mp/inst_mp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Inst mp design in my own project?

Its repository states no licence, so its author keeps all rights: ask Asik007 before reusing the design.