
Smoothiev2-prime
Smoothieware/Smoothieboard2
Hardware files for the Smoothieboard v2, and extension boards

A simple tester for DEC 8881 chips.
Dec 8881 tester is an open-source printed circuit board by ashlin4010, from the ashlin4010/dec_8881_tester repository on GitHub. It is a 2-layer board of 76.2 × 65.4 mm with 36 parts on 28 nets, routed with 152 tracks and 0 vias.
It is built around the 74HCT541D. Its parts include 13 resistors, 8 switches, 5 diodes, 2 ICs and 2 connectors.
A simple tester for DEC 8881 chips.

| Quantity | Part | Link |
|---|---|---|
| 5 | 1K Resistor | |
| 8 | 10K Resistor | |
| 8 | Push Button | https://www.digikey.co.nz/en/products/detail/same-sky-formerly-cui-devices/TS02-66-70-BK-160-LCR-D/15634243 |
| 1 | Barrel Jack | https://www.digikey.co.nz/en/products/detail/same-sky-formerly-cui-devices/PJ-037A/1644545 |
| 1 | DIP-14 ZIF Socket | https://www.aliexpress.com/item/1005007048855354.html |
| 1 | 74HCT541 | https://www.digikey.co.nz/en/products/detail/texas-instruments/SN74HCT541N/277265 |
| 1 | 390ohm Bussed | https://www.digikey.co.nz/en/products/detail/bourns-inc/4606X-101-391LF/1088986 |
| 1 | 180ohm Bussed | https://www.digikey.co.nz/en/products/detail/bourns-inc/4606X-101-181LF/1088969 |
| 5 | 3mm LED RED |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R3, R4, R5, R6, R7, R8, R9 |
| 5 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R10, R11, R12, R13 |
| 5 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5 |
| 4 | Input A | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1, SW3, SW5, SW7 |
| 4 | Input B | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW2, SW4, SW6, SW8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 180R BUS | Resistor_THT:R_Array_SIP6 | RN1 |
| 1 | 390R BUS | Resistor_THT:R_Array_SIP6 | RN2 |
| 1 | 74HCT541 | Package_DIP:DIP-20_W7.62mm | U2 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | ~ | Socket:DIP_Socket-14_W4.3_W5.08_W7.62_W10.16_W10.9_3M_214-3339-00-0602J | U1 |

Smoothieware/Smoothieboard2
Hardware files for the Smoothieboard v2, and extension boards


alpauna/TritonECU
ESP32-S3 engine control unit — fuel injection, ignition timing, wideband O2 (CJ125/LSU 4.9), dashboard, and MQTT telemetry


freeDSP/freeDSPx-ADAT-IO-x4
The freeDSPx ADAT IO x4 is a digital IO expansion board for the freeDSP family. It provides 4 Lightpipe(I2S) inputs and 4 Lightpipe outputs via single Toslink Cable.



CatoLynx/LCD-FIA
Custom hardware and software for a LCD platform passenger information display
It measures 76.2 × 65.4 mm and has 2 copper layers, 1.6 mm thick.
36 parts, built around the 74HCT541D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ashlin4010/dec_8881_tester repository on GitHub, at the commit this page was made from: the board is DEC8881_tester.kicad_pcb and its schematic DEC8881_tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ashlin4010 before reusing the design.