
AWS Composite Adapter
ashlin4010/AWS_hardware_assortment
An assortment of pcbs to connect to a Convergent Technologies AWS

An assortment of pcbs to connect to a Convergent Technologies AWS
AWS CPU Video Decoder is an open-source printed circuit board by ashlin4010, from the ashlin4010/AWS_hardware_assortment repository on GitHub. It is a 2-layer board of 132 × 99.6 mm with 136 parts on 144 nets, routed with 405 tracks and 32 vias.
Its parts include 19 connectors, 10 resistors, 6 ICs, 1 diode and 1 switch. It belongs with the RP2040 boards of this library.
This is a assortment of pcbs made for a Convergent Technologies AWS. These designs may contain faults or errors that could destroy or damage the themselves or the AWS. USE AT YOUR OWN RISK
At this stage I have not create a bill of materials, if and when I make updates to the designs I will try to improve the documentation.
The AWS communicates with two differential pairs, one for clock and one for data. This board uses the Adafruit FT232H Breakout combined with differential drivers/receivers to communicate with the cluster network. It includes some leds controllable from the FT232H and overvoltage protection via a zener. Note: This adaptor unlike the AWS is not able to transmit and receive to its self.

This is effectively a breakout board that allows an Turbo CPU board to interface with peripheralsand and receive power inplace of the original AWS motherboard. It has the following functions: cluster connectors, keyboard connector, speaker breakout and volume, power LED, reset button and LED, video interface connector, and power input.

The Composite Adapter is an attempts to convert the AWSs ttl video to composite. The adapter has been built to be modular, one part contains a power supply circuit and differential line receiver. The other part contains the circuitry that produces the sync signal and is responsible for combining everything into composite. At this stage this adapter has not been testred and most of the resistor values are guesses hence the potentiometers. Note: In order to create an NTSC compatible signal the AWS horizontal scan frequency needs to be decreased. This can be done via an external clock at the J3 connector or Video Debug PCB (Pixel Clock of 14.1606MHz ≈ 15.734kHz horizontal scan).

The Video Debug Borad has to functions, provieds an external video clock and LED indicators for the character ROM. The Video Debug Board is able to provide a small amount of insight into what the CRT controller is doing. But for the most part is more decorative than functional.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 77 | , , , , , , , , , , , , , , , +61 | ||
| 20 | Jumper_2_Small_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17, JP19, JP20, JP21 +4 |
| 12 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J4, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15 |
| 6 | ~ | local:level_shifter | U1, U2, U3, U4, U5, U6 |
| 4 | 330R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R5, R6, R10 |
| 3 | 100R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7, R8, R9 |
| 3 | 22R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J18, J19 |
| 2 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1, J5 |
| 1 | 1N5817 | Diode_THT:D_5W_P12.70mm_Horizontal | D1 |
| 1 | Encoder | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J20 |
| 1 | MountingHole | MountingHole:MountingHole_3.5mm | H1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A2 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Video | local:SWITCHCRAFT_PJRAN1X1U04X | J16 |
| 1 | Video | Connector_PinSocket_2.54mm:PinSocket_2x37_P2.54mm_Vertical | J3 |

ashlin4010/AWS_hardware_assortment
An assortment of pcbs to connect to a Convergent Technologies AWS

ashlin4010/AWS_hardware_assortment
An assortment of pcbs to connect to a Convergent Technologies AWS

ashlin4010/AWS_hardware_assortment
An assortment of pcbs to connect to a Convergent Technologies AWS

ashlin4010/AWS_hardware_assortment
An assortment of pcbs to connect to a Convergent Technologies AWS

ashlin4010/AWS_hardware_assortment
An assortment of pcbs to connect to a Convergent Technologies AWS

ashlin4010/AWS_hardware_assortment
An assortment of pcbs to connect to a Convergent Technologies AWS

ashlin4010/AWS_hardware_assortment
An assortment of pcbs to connect to a Convergent Technologies AWS

ashlin4010/AWS_hardware_assortment
An assortment of pcbs to connect to a Convergent Technologies AWS

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware

Spaceboards/SpaceboardsHardware
A collection of open source hardware that has been designed by Spaceboards


NVlabs/Cypress
Cypress is a scalable, GPU-accelerated PCB placement method inspired by VLSI. It incorporates tailored cost functions, constraint handling, and optimized techniques adapted for PCB layouts.

kbob/MinimumViableSynth
A virtual analog synthesizer with lots of knobs and buttons.

zhol0777/bully-files
Bully is a keyboard designed by paaradiso keyboard design and zhol. It combines low typing angle, a plateless build, and modest but dignified design sensibilities.
It measures 132 × 99.6 mm and has 2 copper layers, 1.6 mm thick.
136 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ashlin4010/AWS_hardware_assortment repository on GitHub, at the commit this page was made from: the board is AWS_CPU_Video_Decoder/AWS_CPU_Video_Decoder/AWS_CPU_Video_Decoder.kicad_pcb and its schematic AWS_CPU_Jumper/AWS_CPU_Jumper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ashlin4010 before reusing the design.