

Macropad
This is an image of the 3d view of the PCB
- Size
- 145 × 59 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 49
- Pads
- 174
- Tracks, vias
- 140, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Oct 2026
- Updated
- 17 Oct 2026
Overview
Macropad is an open-source printed circuit board by asdfKC, from the asdfKC/halflife-week1-project repository on GitHub. It is a 2-layer board of 145 × 59 mm with 19 parts on 49 nets, routed with 140 tracks and 1 via.
It belongs with the keyboards and input boards and the RP2040 boards of this library.
README
README.mdFinal design
halflife-week1-project
For this project, I made a Macropad!
My components used are listed in BOM.md
This is an image of the 3d view of the PCB
This is an image of the PCB Gerber files!
This is my first pcb ever!
GPIO USAGE:
It starts at GPIO0
Key layout
| Col 1 | Col 2 | Col 3 | Col 4 | Col 5 | Col 6 | |
|---|---|---|---|---|---|---|
| Row 1 | Ctrl+C | Ctrl+V | Ctrl+X | Ctrl+Z | Super+L | Mute |
| Row 2 | Print Screen | F11 | Vol− | Vol+ | Up | Enter |
| Row 3 | Previous | Play/Pause | Next | Left | Down | Right |
Switches are numbered SW1–SW18 and wired to GP0–GP17. Row 1 is SW1–SW6, row 2 is SW7, SW9, SW11, SW13, SW15, SW17, and row 3 is SW8, SW10, SW12, SW14, SW16, SW18.
The middle goes in numerical order.
Firmware =D
The firmware is in 'firmware/code.py.' It uses KMK on CircuitPython.
FLASHING INSTRUCTIONS
firmware/FLASHINSTRUCTIONS.md
Switch plate :D
A pretty basic and simple plate is included in the plate/ directory. It has 18 cutouts that match the PCB, each the size of a standard MX switch cutout. The outline is in plate/Plates/plate_Edge_Cuts.dxf
I provided an STL file in the plate/ directory called plate.stl.
Warnings
There are stray copper traces; however, they are dead and do not short the board in any way.
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 +2 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
Similar boards
- 2 layers43.9 × 27.7 mm

- 2 layers50 × 60 mm

Debate Device
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
19 parts915 - 2 layers102.9 × 96.7 mm

ISA adapter
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
19 parts805 - 2 layers60 × 39 mm

- 2 layers70.1 × 43.2 mm

Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers80 × 80 mm

- 2 layers25.4 × 25.4 mm

Ina169
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
19 parts282 - 2 layers58.4 × 28.6 mm

New rele
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
19 parts269
Questions
How big is the Macropad PCB?
It measures 145 × 59 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Macropad use?
19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Macropad KiCad files?
From the asdfKC/halflife-week1-project repository on GitHub, at the commit this page was made from: the board is macropad.kicad_pcb and its schematic macropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Macropad design in my own project?
Its repository states no licence, so its author keeps all rights: ask asdfKC before reusing the design.