2 layers63.5 × 71.1 mm
2 layers34 × 53 mm
Simpledistancemeasurement
asda1-max/simpledistancemeasurement- Size
- 34 × 53 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 34
- Pads
- 54
- Tracks, vias
- 63, 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Feb 2025
- Updated
- 13 Feb 2025
Overview
Simpledistancemeasurement is an open-source printed circuit board by asda1-max, from the asda1-max/simpledistancemeasurement repository on GitHub. It is a 2-layer board of 34 × 53 mm with 12 parts on 34 nets, routed with 63 tracks and 1 via.
It is built around the ATMEGA328-PU, DHT11 and AMS1117-5.0. Its parts include 3 resistors, 3 ICs, 3 diodes and 2 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
DHT11
SIP-4-20℃~+60℃ 1mA 3.3V~5.5V 5%RH~95%RH ±2℃ ±5%RH SIP-4 Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 330r | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D2, D3 |
| 1 | 10 mu | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C2 |
| 1 | 10mu | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | ATmega328-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | Battery_Cell | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | BT1 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
Similar boards
- 2 layers106 × 71.3 mm
Desktop Hardware Monitor
aapaetsch/HardwareMonitorArduino
Code, pcb files and schematics for building a hardware monitor based around the atmega328p
44 parts - 2 layers74.5 × 45 mm
- 2 layers69.6 × 48.8 mm
Node
trishanu-init/Blaze_Hunters
This Repository hosts the files required for the App, Website and about page required for HackFest finale demonstration by Circuit Breakers.
16 parts - 2 layers101.5 × 53 mm
Temp
AvishkaVishwa/Microcontroller-Design-Project-Temperature-Monitoring-System
This project is a temperature display and alarm system designed for educational purposes as part of the IA 2209 - Microcontroller Laboratory course.
29 parts4 - 2 layers
- 2 layers50.7 × 21.5 mm
ATmega328p microcontroller board
Abhi90808/ATmega328p_microcontroller_board
This project is a ground-up recreation of the Arduino Nano form factor using the ATmega328P microcontroller. Rather than using a pre-made module, the entire hardware stack was designed from scratch: oscillator circuit…
26 parts - 4 layers59.9 × 66.5 mm
Questions
How big is the Simpledistancemeasurement PCB?
It measures 34 × 53 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Simpledistancemeasurement use?
12 parts, built around the ATMEGA328-PU, DHT11 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Simpledistancemeasurement KiCad files?
From the asda1-max/simpledistancemeasurement repository on GitHub, at the commit this page was made from: the board is Kicad.kicad_pcb and its schematic Kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Simpledistancemeasurement design in my own project?
Its repository states no licence, so its author keeps all rights: ask asda1-max before reusing the design.