Skip to the content
2 layers30 × 30 mmMicro drone(esp32 s3 xiao), the printed circuit board in 3D

Micro drone(esp32 s3 xiao)

aryaman2050/Micro_ESP_Drone

A compact micro brushed drone featuring an ESP32-based flight controller, a custom-designed 2-layer PCB, and Wi-Fi-based control. The project focuses on lightweight hardware integration, compact electronics design, and custom flight control for a miniaturized drone platform.

Size
30 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
67
Nets
58
Pads
201
Tracks, vias
364, 19
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 Oct 2026
Updated
22 Oct 2026

Overview

Micro drone(esp32 s3 xiao) is an open-source printed circuit board by aryaman2050, from the aryaman2050/Micro_ESP_Drone repository on GitHub. It is a 2-layer board of 30 × 30 mm with 67 parts on 58 nets, routed with 364 tracks and 19 vias.

It is built around the BMP280, SI2300DS-T1-GE3-VB and MCP73831T-2ACI/OT-HXY, with the SS14, AO3401 and BNO085 among its other parts. Its parts include 26 resistors, 15 capacitors, 9 diodes, 5 ICs and 3 connectors. It belongs with the robots and motor control and radio and wireless boards and the ESP32 boards of this library.

Main components

7

README

README.md

Micro ESP Drone 🚁

A compact, custom-built micro brushed drone featuring an ESP32-based flight controller and a custom-designed 2-layer PCB. The project focuses on miniaturized drone electronics, lightweight hardware integration, and Wi-Fi-based control.

✨ Features

  • ESP32-Based Flight Controller: Custom flight control hardware built around the ESP32.
  • Custom 2-Layer PCB: Compact PCB design integrating the drone's electronics.
  • Wi-Fi Control: Wireless control capability using Wi-Fi.
  • Micro Brushed Platform: Lightweight design intended for a small-form-factor drone.
  • Custom Hardware Development: Hands-on integration of electronics, PCB design, and embedded firmware.

🛠️ Technology Stack

  • Microcontroller: ESP32
  • PCB Design: Custom 2-layer PCB
  • Programming: Embedded C/C++
  • Development Environment: Arduino IDE
  • Communication: Wi-Fi

🎯 Project Objective

The goal is to develop a compact, cost-effective micro drone by designing and integrating custom flight control electronics into a small PCB. The project explores embedded systems, wireless communication, and hardware miniaturization for micro aerial vehicles.

🚀 Project Status

Ongoing Development

Further development and testing will focus on hardware integration, firmware refinement, and flight performance.

👨‍💻 Author

Aryaman Agrawal

Electrical and Electronics Engineering | Embedded Systems | Drone Development


Built with a passion for embedded electronics and aerial robotics.

Parts

67
QtyValueFootprintReferences
610KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR19, R25, R27, R30, R34, R35
5SS14Diode_SMD:D_SMAD5, D8, D9, D10, D12
40.1uFCapacitor_SMD:C_0805_2012MetricC2, C5, C6, C7
4100Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R6, R11, R29
410kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR12, R13, R14, R15
41uFCapacitor_SMD:C_0805_2012MetricC12, C13, C14, C15
4SI2300DS-T1-GE3SI2300:SOT23_1_U3, U5, U6, U7
30.1uFCapacitor_SMD:C_0603_1608MetricC1, C3, C4
310kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR18, R22, R23
34.7kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR10, R20, R21
21kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR16, R17
21uFCapacitor_SMD:C_0603_1608MetricC8, C9
24.7uFCapacitor_SMD:C_0805_2012MetricC10, C11
2LEDLED_SMD:LED_0603_1608MetricD6, D7
110KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7
12KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR32
14.7kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR9
1470RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR33
1AO3401Package_TO_SOT_SMD:SOT-23Q1
1BAT_Connector_JST_PHResistor_SMD:R_0805_2012MetricJ3
1BMP280Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumberingBMP280
1BNO085BNO085:IC_BNO085BNO085
1Conn_01x02_SocketConnector_PinSocket_1.00mm:PinSocket_1x02_P1.00mm_VerticalJ1
1ESD5ZxxDiode_SMD:D_SOD-523D11
1LBMotorResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderMotor
1LEDLED_SMD:LED_0805_2012MetricD4
1LFMotorResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderMotor
1MCP73831T-2ACI_OTMCP73831T-2ACI_OT:SOT95P280X145-5NU8
1MSK12C02MSK12C02:SW_MSK12C02S1
1RBMotorResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderMotor
1RFMotorResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderMotor
1USB_C_Receptacle_PowerOnly_6PConnector_USB:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_HorizontalJ2
1XIAO_ESP32_S3XIAO_ESP32_S3:MODULE_XIAO_ESP32_S3XIAO_ESP32_S3

Similar boards

  • 6 layers39.6 × 39.6 mmPAL Drone Schematic, the printed circuit board in 3D

    PAL Drone Schematic

    Mike-Sacca/PAL-ESP32StudentDrone-PCBandFirmware

    PCB Design Files and Firmware for the Police Athletic League Student Drone, first deployed at the Elizabeth Police Departments Drone Camp in 2026. Project based on the ESP-Fly by Max Imagination and SEEED Studio.

    56 parts
  • 2 layers32 × 130 mmMedia Controller, the printed circuit board in 3D

    Media Controller

    mkhairyx/Media_Controller

    A device that controls your TV using IR signals to mimic your TV's remote control. It detects a gesture and then sends the signal that was coded for that gesture.

    34 parts
  • 2 layers44.5 × 48.3 mmHandbell, the printed circuit board in 3D

    Handbell

    dcuccia/digital-handbell

    A software and hardware project to create a digital handbell using microcontrollers and speakers and gesture recognition

    104 partsMIT
  • 2 layers64 × 46 mmWeatherframe, the printed circuit board in 3D

    Weatherframe

    amselgesang/weatherframe_v01

    My weather station hardver

    50 partsMIT
  • 2 layers85.6 × 54 mmWallet dmm, the printed circuit board in 3D

    Wallet dmm

    ArgonautGit/wallet_dmm

    A multimeter the size of a credit card: DC volts, resistance, continuity and diode test, shown on a 0.91" OLED, with three buttons, an RGB LED and a piezo beeper.

    70 parts
  • 2 layers25 × 22.6 mmUSlime, the printed circuit board in 3D

    USlime

    ReSummit/uSlime

    Micro form of SlimeVR trackers using BNO085

    48 parts4GPL-3.0
  • 2 layers59 × 59 mmPCB 2, the printed circuit board in 3D

    PCB 2

    kubbd/AeroTrackNow

    A soda-can-sized satellite designed to achieve autonomous, guided descent using a parafoil and real-time GNSS-based navigation.

    5 parts

Questions

How big is the Micro drone(esp32 s3 xiao) PCB?

It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Micro drone(esp32 s3 xiao) use?

67 parts, built around the BMP280, SI2300DS-T1-GE3-VB, MCP73831T-2ACI/OT-HXY and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Micro drone(esp32 s3 xiao) KiCad files?

From the aryaman2050/Micro_ESP_Drone repository on GitHub, at the commit this page was made from: the board is Micro_drone(esp32 s3 xiao).kicad_pcb and its schematic Micro_drone(esp32 s3 xiao).kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Micro drone(esp32 s3 xiao) design in my own project?

Its repository states no licence, so its author keeps all rights: ask aryaman2050 before reusing the design.