2 layers100 × 56.8 mm
JoyKey
techy-robot/JoyKey
A small macropad that simultaneously acts as game controller and an entertainment device.
64 parts1CERN-OHL-S-2.0
2 layers54.9 × 23.5 mm
Stdc14 adapter
arvindsa/stlinkv3-adapterSTVlink3 Adapter
- Size
- 54.9 × 23.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 36
- Pads
- 112
- Tracks, vias
- 245, 38
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Jul 2025
- Updated
- 23 Jul 2025
Overview
Stdc14 adapter is an open-source printed circuit board by arvindsa, from the arvindsa/stlinkv3-adapter repository on GitHub. It is a 2-layer board of 54.9 × 23.5 mm with 26 parts on 36 nets, routed with 245 tracks and 38 vias.
It is built around the AP2112K-3.3, MCP73831 and DMG3415U, with the MBR0540 and USB4085-GF-A among its other parts. Its parts include 7 resistors, 5 capacitors, 5 connectors, 3 diodes and 2 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
5
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
MCP73831
UncategorisedMicrochip Technology
DMG3415U
SOT-23MOSFETsTECH PUBLIC
MBR0540
SOD-123-55℃~+150℃ 1 Independent 20uA@40V 40V 5.5A 500mA 510mV@500mA SOD-123 Schottky Diodes ROHSonsemiSchottky Diodes
USB4085-GF-A
插件-40℃~+85℃ 1 48V 5A Black Female Right Angle Type-C USB 2.0 插件 USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12 |
| 2 | Red | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 470E | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J3 |
| 1 | Conn_ST_STDC14 | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J2 |
| 1 | DMG3415 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MBR0540 | Diode_SMD:D_SOD-123 | D1 |
| 1 | MCP73831 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_Omron_B3FS-105xP | SW1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW2 |
| 1 | USB4085-GF-A | Arvind_Connector_USB:USB_C_Receptacle_GCT_USB4085_NoSilkScreenoverPCBedge | J1 |
| 1 | ~ | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J4 |
Questions
How big is the Stdc14 adapter PCB?
It measures 54.9 × 23.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stdc14 adapter use?
26 parts, built around the AP2112K-3.3, MCP73831, DMG3415U and MBR0540. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stdc14 adapter KiCad files?
From the arvindsa/stlinkv3-adapter repository on GitHub, at the commit this page was made from: the board is stdc14_adapter.kicad_pcb and its schematic stdc14_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stdc14 adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask arvindsa before reusing the design.
Similar boards
- 4 layers84 × 25.6 mm
Little Helper
wolkstein/minimal-esp32-ble-midi-ctrl
A simple Bluthooth Midi DAW transport control unit based on an esp32 mc
41 parts1GPL-3.0 - 4 layers70 × 50 mm
Finalized bluetooth remote
3pnguyen/esp32-bluetooth-media-keyboard
Electronic project that provides the same control as wireless earbuds.
62 partsMIT - 4 layers62.7 × 35.5 mm
- 2 layers81.3 × 99.8 mm
- 4 layers120 × 89.3 mm
SMK macro pad
mburger89/SMK_macro_pad
4x4 wireless macro pad — RP2040 + Raspberry Pi RM2. KiCad project generated from Python; includes a 42%-smaller 'mini' variant with back-mounted electronics.
89 partsMIT - 4 layers30 × 40 mm
- 2 layers47.7 × 80.7 mm
Christmas tree ear ring
arvindsa/xmas-tree-earring
A pair of wireless, synchronized LED earrings with nRF52 MCUs running deterministic animation patterns.
65 parts