Skip to the content
2 layers112.9 × 89.4 mmSmall paintbrush hotswap, the printed circuit board in 3D

Small paintbrush hotswap

artseyio/thepaintbrush135

Small keyboard designs for folks who cannot use 'traditional' keyboard designs. These designs are focused on running the artsey.io keyboard layout.

Size
112.9 × 89.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
33
Pads
218
Tracks, vias
341, 26
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
17 Apr 2021
Updated
14 Feb 2022

Overview

Small paintbrush hotswap is an open-source printed circuit board by artseyio, from the artseyio/thepaintbrush repository on GitHub. It is a 2-layer board of 112.9 × 89.4 mm with 27 parts on 33 nets, routed with 341 tracks and 26 vias.

Its parts include 3 connectors, 2 ICs and 2 switches. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

README

hardware/v1/README.md

Paintbrush Version 1

This is the initial hardware design of the Paintbrush mini keyboard. This was our first attempt at a hardware design and it's pretty good.

Fortunately we though of some updates and ideas ahead of the initial prototypes being ordered.

This version of the hardware was NEVER actually built or tested. Unless you really want to use this design, we recommend skipping straight to version 2.

Version 1 Rendering

Parts

27
QtyValueFootprintReferences
10SW_Pushkeyswitches:Kailh_socket_PG1350_optional_reversibleKEY1, KEY2, KEY3, KEY4, KEY5, KEY6, KEY7, KEY8, KEY9, KEY10
2Conn_01x04lib:OLEDJ2, J3
2ProMicroKeebio-Parts:ArduinoProMicroU1, U2
2SW_PushButton_Switch_SMD:SW_SPST_B3U-1000PPUSH1, PUSH2
2SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW1, SW2
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1

The 19 most common of 27 parts.

More from artseyio/thepaintbrush

2
  • 2 layers94 × 47 mmSmall paintbrush, the printed circuit board in 3D

    Small paintbrush

    artseyio/thepaintbrush

    Small keyboard designs for folks who cannot use 'traditional' keyboard designs. These designs are focused on running the artsey.io keyboard layout.

    23 parts135
  • 2 layers100 × 50 mmSmall paintbrush hotswap, the printed circuit board in 3D

    Small paintbrush hotswap

    artseyio/thepaintbrush

    Small keyboard designs for folks who cannot use 'traditional' keyboard designs. These designs are focused on running the artsey.io keyboard layout.

    22 parts135

Similar boards

  • 2 layers47.6 × 27.3 mmMmc usb 1, the printed circuit board in 3D

    Mmc usb 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    27 parts1.2k
  • 2 layers77.4 × 77.4 mmCORAZON LEDS CON FADE, the printed circuit board in 3D

    CORAZON LEDS CON FADE

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    27 parts915
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers22 × 42 mmNvme bm to e, the printed circuit board in 3D

    Nvme bm to e

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    27 parts253GPL-3.0
  • 2 layers80 × 61 mmPicoProducer, the printed circuit board in 3D

    PicoProducer

    pjgpetecodes/pico-streamdeck

    This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

    27 parts230MIT
  • 2 layers186 × 45 mmAddOnD, the printed circuit board in 3D

    AddOnD

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    27 parts226CC-BY-SA-4.0
  • 2 layers29.6 × 40.6 mmDbwifi revB, the printed circuit board in 3D

    Dbwifi revB

    ugcs/ddc

    Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

    27 parts223

Questions

How big is the Small paintbrush hotswap PCB?

It measures 112.9 × 89.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Small paintbrush hotswap use?

27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Small paintbrush hotswap KiCad files?

From the artseyio/thepaintbrush repository on GitHub, at the commit this page was made from: the board is hardware/v3/small-paintbrush-hotswap.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Small paintbrush hotswap design in my own project?

Its repository states no licence, so its author keeps all rights: ask artseyio before reusing the design.