2 layers27.9 × 16.5 mm
2 layers
Slider DAC
ArtilRobotics/Selector_DACA PCB to convert the signal from 2 selector devices 4 & 5 ways with 24V input to proportional out from 0 to 10V DC.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 12
- Pads
- 41
- Tracks, vias
- 46, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Nov 2022
- Updated
- 21 Nov 2022
Overview
Slider DAC is an open-source printed circuit board by ArtilRobotics, from the ArtilRobotics/Selector_DAC repository on GitHub, published under the MIT licence. It is a 2-layer board with 18 parts on 12 nets, routed with 46 tracks and 0 vias.
It belongs with the audio and music boards of this library.
README
README.mdSelector_DAC
A PCB to convert the signal from 2 selector devices 4 & 5 ways with 24V input to proportional out from 0 to 10V DC.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 27K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5, R7, R8, R9, R10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 140K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R6 |
| 1 | 24V | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | POWER1 |
| 1 | Sel1_INPUT | TerminalBlock:TerminalBlock_bornier-6_P5.08mm | Input1 |
| 1 | Sel2_INPUT | TerminalBlock:TerminalBlock_bornier-6_P5.08mm | Input2 |
| 1 | Sel_OUT | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | Output1 |
Questions
What parts does the Slider DAC use?
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Slider DAC KiCad files?
From the ArtilRobotics/Selector_DAC repository on GitHub, at the commit this page was made from: the board is SliderDAC/Slider_DAC/Slider_DAC.kicad_pcb and its schematic SliderDAC/Slider_DAC/Slider_DAC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Slider DAC design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers42.7 × 13.7 mm
Stm32-mini12864
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
18 parts1.1kGPL-3.0 - 2 layers41.2 × 46.6 mm
- 2 layers44 × 51.3 mm
4272MAVcoder R4
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
18 parts915 - 2 layers28.3 × 14.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
18 parts716GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 stepper driver
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
18 parts546MIT - 2 layers
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY V2
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
18 parts515GPL-3.0