Skip to the content
2 layersUsmd, the printed circuit board in 3D

If all compoents are soldered properly LED should blink at 1Hz:

Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
7
Pads
51
Tracks, vias
81, 10
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
7 Mar 2021
Updated
2 Oct 2022

Overview

Usmd is an open-source printed circuit board by arthurbenemann, from the arthurbenemann/usmd repository on GitHub. It is a 2-layer board with 15 parts on 7 nets, routed with 81 tracks and 10 vias.

Its parts include 10 capacitors, 2 resistors, 1 IC and 1 diode.

README

README.md

uSMD

Board

usmdtop usmdbot

BOM

Qty.Rec. Qty.DK Part NumberManufacturer Part NumberDescriptionReferenceUnit PriceExtended Price
1015587-4850-1-NDJMK021BJ103KK5WCAP CER 10000PF 6.3V X5R 008004C1 - C100.53300$8.00
12754-2028-1-NDAPG0603SEC-E-TTLED RED CLEAR 2SMDD10.43000$0.86
13118-CR01005-FW-1001GLFCT-NDCR01005-FW-1001GLFRES 1K OHM 1% 1/32W 01005R10.10000$0.30
13YAG6214CT-NDRC0100FR-0710MLRES SMD 10M OHM 1% 1/32W 01005R20.31000$0.93
12296-46430-1-NDLMC555CTPX/NOPBIC OSC SINGLE TIMER 3MHZ 8-USMDU11.34000$2.68
1136-3031-ND3031BATTERY RETAINER COIN PC PINBT10.61000$0.61
11P031-NDCR-1025/BNBATTERY LITHIUM 3V COIN 10MMN/A1.03000$1.03
136NPtd21RuSMD-Rev1-PCBuSMD OSHPARK PCBN/A0.50000$1.50
Total$15.64

Photos

uSMD and misery challenge stacked up.

USMD under microscope

Size of an 08004 against a human hair

If all compoents are soldered properly LED should blink at ~1Hz:

External

Marco Reps assembly on video, better than the original: https://www.youtube.com/watch?v=2vpTYaDGmCs&t=1451s

Parts

15
QtyValueFootprintReferences
1010nFusmd:C_008004_0201MetricC1, C2, C3, C4, C5, C6, C7, C8, C9, C10
110MResistor_SMD:R_01005_0402MetricR2
11kResistor_SMD:R_01005_0402MetricR1
1Battery_Cellusmd:BatteryHolder_Keystone_3031_1x10mmBT1
1LEDLED_SMD:LED_0201_0603MetricD1
1LMC555xTPPackage_BGA:Texas_DSBGA-8_1.43x1.41mm_Layout3x3_P0.5mmU1

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

What parts does the Usmd use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Usmd KiCad files?

From the arthurbenemann/usmd repository on GitHub, at the commit this page was made from: the board is usmd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Usmd design in my own project?

Its repository states no licence, so its author keeps all rights: ask arthurbenemann before reusing the design.