Skip to the content
4 layers50 × 13 mmPfeil, the printed circuit board in 3D
Size
50 × 13 mm
Copper layers
4
Thickness
1.6 mm
Parts
52
Nets
86
Pads
290
Tracks, vias
326, 113
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 Dec 2024
Updated
22 Mar 2025

Overview

Pfeil is an open-source printed circuit board by artandtechspace, from the artandtechspace/Smart-Arrow repository on GitHub. It is a 4-layer board of 50 × 13 mm with 52 parts on 86 nets, routed with 326 tracks and 113 vias.

It is built around the ANT016008LCS2442MA1. Its parts include 30 capacitors, 9 resistors, 5 ICs, 3 connectors and 2 crystals. It belongs with the nRF52 and nRF5x boards of this library.

Main components

1

README

README.md

Smart-Arrow

Parts

52
QtyValueFootprintReferences
4100nF 10%Capacitor_SMD:C_0201_0603MetricC1, C3, C7, C8
41uFCapacitor_SMD:C_0805_2012MetricC10, C11, C12, C13
312pF NP0 2%Capacitor_SMD:C_0201_0603MetricC32, C47, C48
3N.C.Capacitor_SMD:C_0201_0603MetricC39, C43, C49
20R 1%Resistor_SMD:R_0201_0603MetricR5, R6
2100K 1%Resistor_SMD:R_0201_0603MetricR1, R3
2100k 1%Resistor_SMD:R_0201_0603MetricR7, R9
210uF 10%Capacitor_SMD:C_0402_1005MetricC2, C5
21K 1%Resistor_SMD:R_0201_0603MetricR8, R10
24.7uFCapacitor_SMD:C_0201_0603MetricC44, C46
26.2pF NPO 5%Capacitor_SMD:C_0201_0603MetricC4, C29
2820pFCapacitor_SMD:C_0201_0603MetricC42, C45
2Conn_01x01_PinConnector_Wire:SolderWirePad_1x01_SMD_1x2mmJ1, J2
2WSEN-PADS_2511020213301Package_LGA:ST_HLGA-10_2x2mm_P0.5mm_LayoutBorder3x2yU2, U3
10.5pF NPO +10%Capacitor_SMD:C_0201_0603MetricC50
10.8pF NPO +10%Capacitor_SMD:C_0201_0603MetricC51
10.8pF NPO 5%Capacitor_SMD:C_0201_0603MetricC6
1100nFCapacitor_SMD:C_0201_0603MetricC38
1100pFCapacitor_SMD:C_0201_0603MetricC40
112pF NPO 2%Capacitor_SMD:C_0201_0603MetricC33
11pFCapacitor_SMD:C_0201_0603MetricC41
125360303200012536030320001:2536030320001IC1
12R2Resistor_SMD:R_0201_0603MetricR11
14.7nH 5% HFLED_SMD:LED_0402_1005MetricL5
14.7uF 10%Capacitor_SMD:C_0201_0603MetricC9
1ANT016008LCS2442MA1ANT016008LCS2442MA1:ANT016008LCS2442MA1ANT1
1AP7312-1233FM-7LIB_AP7312-1233FM-7:SON50P201X181X60-7NIC2
1NetTie_2NetTie:NetTie-2_SMD_Pad0.5mmNT1
1TagConnectConnector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_VerticalJ3
1XTAL 32.768kHz 9pFCrystal:Crystal_SMD_2016-4Pin_2.0x1.6mmX2
1XTAL 32MHz 8pFCrystal:Crystal_SMD_2016-4Pin_2.0x1.6mmX1
1nRF52840Package_DFN_QFN:Nordic_AQFN-73-1EP_7x7mm_P0.5mmU4

More from artandtechspace/Smart-Arrow

1
  • 4 layers50 × 6 mmPfeil, the printed circuit board in 3D

    Pfeil

    artandtechspace/Smart-Arrow

    66 parts

Similar boards

  • 2 layers76.1 × 87.9 mmBadge ESC 2025, the printed circuit board in 3D

    Badge ESC 2025

    endsummercamp/badge-2025

    120 parts9
  • 2 layers67.1 × 23.4 mmAFE4404-tri PPG, the printed circuit board in 3D

    AFE4404-tri PPG

    ShifatHossain/AFE4404-tri-PPG

    An AFE4404 and ESP32 PICO D4/V3 based device to acquire three wavelength PPG signal.

    34 parts2
  • 4 layers45 × 49 mmSwarm drone, the printed circuit board in 3D

    Swarm drone

    aniranaway/Drone_Swarm

    A fully custom, low-level embedded hardware and firmware platform designed for autonomous multi drone swarms. The system integrates custom STM32-based flight controller PCBs, coreless DC motor drive arrays for a micro…

    108 parts
  • 2 layers25 × 20 mmSmartBall PCB, the printed circuit board in 3D

    SmartBall PCB

    Keaton-Ruthardt/Masters_Thesis

    Reproducibility materials for the MS thesis An Instrumented Baseball for Per-Finger Grip Force Measurement: Finger Force Tracks Delivery Effort Rather Than Release Velocity (Keaton Ruthardt, MS Computer Science — Data…

    46 partsMIT
  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 4 layers50 × 50 mmSTMF103C8T6 Dev Board, the printed circuit board in 3D

    STMF103C8T6 Dev Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    52 parts915
  • 4 layers70 × 60 mmQuiver PT3 FC PCB, the printed circuit board in 3D

    Quiver PT3 FC PCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    52 parts617CERN-OHL-S-2.0
  • 4 layers30 × 30 mmReCamera B101 B2 v0.1, the printed circuit board in 3D

    ReCamera B101 B2 v0.1

    Seeed-Studio/OSHW-reCamera-Series

    reCamera is a series of open-source AI cameras.

    52 parts495Apache-2.0

Questions

How big is the Pfeil PCB?

It measures 50 × 13 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Pfeil use?

52 parts, built around the ANT016008LCS2442MA1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pfeil KiCad files?

From the artandtechspace/Smart-Arrow repository on GitHub, at the commit this page was made from: the board is Hardware/Pfeil.kicad_pcb and its schematic Hardware/6ac.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pfeil design in my own project?

Its repository states no licence, so its author keeps all rights: ask artandtechspace before reusing the design.