Skip to the content
2 layersOrrery v1, the printed circuit board in 3D

This open-source project gathers small signals from the world and turns them into daily broadcasts of art, language, and atmosphere.

Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
43
Pads
103
Tracks, vias
240, 0
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
4 Apr 2026
Updated
8 Nov 2026

Overview

Orrery v1 is an open-source printed circuit board by art-mon, from the art-mon/orrery repository on GitHub. It is a 2-layer board with 20 parts on 43 nets, routed with 240 tracks and 0 vias.

It is built around the GY-302 and ESP32-S3-DEVKITC-1-N8. Its parts include 8 capacitors, 3 ICs, 3 connectors and 1 switch. It belongs with the ESP32 boards of this library.

Main components

2

README

README.md

About

This open-source project gathers small signals from the world and turns them into daily broadcasts of art, language, and atmosphere.

Using public data, curated artwork, short written messages, and generative AI, it tries to shape something clear and gentle—something that can inform, but also quietly accompany a moment in the day. The art is curated by friends and family, so the project grows not only from data, but also from taste, memory, and shared sensibility.

The goal is to keep each broadcast simple, beautiful, and easy to receive: a small composition made from information, care, and imagination.

Link to the preview: https://art-mon.github.io/orrery/display/

Parts

20
QtyValueFootprintReferences
4100nF, 100VCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC3, C4, C6, C7
4MountingHoleMountingHole:MountingHole_3.2mm_M3_ISO7380H1, H2, H3, H4
3100uF, 25VCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2, C5, C8
2Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ1, J4
11000uF, 25VCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC1
1BH1750_GY-302Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalU2
1Conn_02x08_Odd_EvenConnector_IDC:IDC-Header_2x08_P2.54mm_VerticalJ2
1ESP32-S3-DevKitCEspressif:ESP32-S3-DevKitCU1
1Jumper_2_BridgedTestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mmJP1
1KY-040Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalSW1
1MAX98357AConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalU3

Similar boards

  • 2 layers56.4 × 78.4 mmAIOsense, the printed circuit board in 3D

    AIOsense

    Schluggi/AIOsense

    ESPHome based all-in-one sensor

    25 parts162MIT
  • 2 layers22 × 71 mmCircut, the printed circuit board in 3D

    Circut

    larry-wong/tiny_sensor

    基于 ESP32-S3 的温湿度 / 光照 / 人体存在传感器和红外发射器。

    18 parts34
  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 2 layers129.9 × 63.6 mmTraeger rev 2.3.0.kicad pro, the printed circuit board in 3D

    Traeger rev 2.3.0.kicad pro

    jazzmonger/Traeger-PID-Controller

    Traeger Smoker/Grill Controller based on an

    45 parts36
  • 2 layers168.8 × 78.9 mmGameboy3, the printed circuit board in 3D

    Gameboy3

    ohasanov-hbrw/tribit32-advanced

    A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!

    61 parts8
  • 2 layers134.6 × 49.5 mmMem esp, the printed circuit board in 3D

    Mem esp

    fread/visvitalis

    A very simple modular relay computer

    71 parts7
  • 2 layers90 × 102 mmPL Toon, the printed circuit board in 3D

    PL Toon

    pl-toon/pl-toon-codes

    PL-TOON material

    39 parts7
  • 2 layers119.4 × 98.9 mmPCB Pami, the printed circuit board in 3D

    PCB Pami

    FIPATECH/CDFR26_PAMI

    Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique

    25 parts6

Questions

What parts does the Orrery v1 use?

20 parts, built around the GY-302 and ESP32-S3-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Orrery v1 KiCad files?

From the art-mon/orrery repository on GitHub, at the commit this page was made from: the board is hardware/orrery_v1/orrery_v1.kicad_pcb and its schematic hardware/orrery_v1/orrery_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Orrery v1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask art-mon before reusing the design.