2 layers89 × 100 mm
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
132 parts388
2 layers106.9 × 68.7 mm
Daemonbite Controller Hub
Arrghus8/Daemonbite-Controller-Hub13ARDUINO PRO MICRO.STEP taken from https://grabcad.com/library/arduino-pro-micro-1.
- Size
- 106.9 × 68.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 55
- Pads
- 106
- Tracks, vias
- 212, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210228)
- Created
- 30 Apr 2021
- Updated
- 30 Apr 2021
Overview
Daemonbite Controller Hub is an open-source printed circuit board by Arrghus8, from the Arrghus8/Daemonbite-Controller-Hub repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 106.9 × 68.7 mm with 12 parts on 55 nets, routed with 212 tracks and 17 vias.
It is built around the ATMEGA32U4. Its parts include 8 ICs and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
daemonbite_controller_hub/README.mdKiCad Version: (5.99.0-9987-g41839f7e3f), release build
ARDUINO PRO MICRO.STEP taken from https://grabcad.com/library/arduino-pro-micro-1.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01 | MountingHole:MountingHole_3.2mm_M3_Pad | J1, J2, J3, J4 |
| 2 | ATmega32u4 | daemonbite_controller_hub:ATmega32U4 | U1, U2 |
| 2 | MD_port | daemonbite_controller_hub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | U7, U8 |
| 2 | NES_port | daemonbite_controller_hub:NES_port | U5, U6 |
| 2 | SNES_port | daemonbite_controller_hub:SNES_port | U3, U4 |
Questions
How big is the Daemonbite Controller Hub PCB?
It measures 106.9 × 68.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Daemonbite Controller Hub use?
12 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Daemonbite Controller Hub KiCad files?
From the Arrghus8/Daemonbite-Controller-Hub repository on GitHub, at the commit this page was made from: the board is daemonbite_controller_hub/daemonbite_controller_hub.kicad_pcb and its schematic daemonbite_controller_hub/daemonbite_controller_hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Daemonbite Controller Hub design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers22.9 × 36.7 mm
Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers303.6 × 96.1 mm
- 2 layers114.9 × 77 mm
- 2 layers444.1 × 151.2 mm
Gh80-3003
evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)
287 parts69CC-BY-SA-4.0 - 2 layers232.2 × 76.7 mm
- 2 layers373.2 × 131.8 mm
- 2 layers17.8 × 33 mm
